TREND H/JIG/C HINGE JIG SKELETON TWO PART + TR12 CUTTER + TREND CORNER CHISEL + CASE

Register the Jig Guarantee on-line at  www.trend-uk.com/guarantee, quoting any 2 of A, B, C or D in the comments box and add the 8-digit serial number shown on the Redemption Claim Form supplied with the product. Allow 5 working days for delivery of your accessory Offer ends 1/6/18

• Used on-site & in joinery shops to increase productivity with excellent results.
• Four apertures for fire door requirements.
• No need for marking out in the conventional way.
• Quick & simple to set-up as the hinge is used as the pattern.
• Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges.
• Use with a light duty plunge router with 1/4 inch collet.
• Long reach router cutter required, 12mm diameter with 70mm overall length.
• Adjustable edge guides with preset for hinge of 20mm, 25mm and 30mm
• Unibase may be needed.
• Patent No. GB2285410, GB1106608.1
• T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160.

Dimensions:
Hinge sizes possible
Length min.=2 5/8" (67 mm)
Length max.=5" (127 mm)
Width min.=1/2" (12.7 mm)
Width max.=1 3/8" (35 mm)

Door sizes possible
Height min.=6' 5" (1956 mm)
Height max.=2100 mm*
Thickness min.=5/8" (16 mm)
Thickness max.=2" (51 mm)
* Please note for doors over 2040mm the bottom hinge will be higher than 9" up.
Weight= 2.9 kg
Jig overall length=1956 mm

• 3 x Hinge sliding aperture block assemblies
• 4 x Bradawls (short blade)
• 1 x 16mm guide bush
• 1 x Carry case