Mafell MF26cc/400 Multi Profile Cutter 240V in carrying case
The best tools are those that resolve everyday problems efficiently and can be used for several applications. The MF 26cc fits the bill in every respect and therefore offers much more than a conventional router or molding tool. The design of the MF 26cc is characterized by the use of extremely rugged, high-quality and precision-made parts, including the lightweight magnesium die-cast houseing and impact-resistant, fiber glass-reinforced plastic components. The guard that fully encloses the blade of the MF 26cc achieves the best possible efficiency by keeping the workplace clean. Very few chips and extremely little dust escape from the houseing. In addition, the design of the dust and chip channels ensures optimum removal by suction. The chip deflector comes into its own when the MF 26cc is mounted on the guide rail. The deflector creates a seal with the workpiece and diverts the swarfaway from the operator, which is especially desirable when working with aluminum composite panels. Amoung the other design details that facilitates clean working are the rotating hose connector and the guides for keeping the hose and cable tidy.
With expanding groove cutter (included)
Equipped with the MF-VN 25, the multi-cutter can produce grooves for risers or service ducts efficiently and quickly.
With aluminum composite cutter (available as accessory)
The MF-AF 90 can be used for routing and folding techniques, as applied in facade construction and with sign boards.
With slotting head (available as accessory)
Three slots can be cut in one pass with the MF-SE 3. This quick and simple bending technique is applied to produce curved elements.
The MF 26 cc multi-cutter can be operated to a cutting depth of 26 mm on the guide rail and as a plunge-cut saw.
Routing and folding
90º corners for wallboard without an angle bead. Simply route a 90º V-groove without breaking the paper, apply glue to the faces of the groove, and press togther.
Aluminum composite panels
In modern architecture, aluminum composite panels are used on facades and at the entrances to buildings. Make adjustments and form edges accurately with the aluminum composite MF-AF 90 router, 40-teeth TCT sawblade (40z) & MAFELL guide rail F.
With the appropriate MAFELL sawblade, the MF 26 cc can quickly and easily be transformed into a plunge-cut saw. Cuts up to 26 mm deep can be made on the guide rail.
Curves can be cut as well for service ducts in soft fiberboard.
Three slots can be cut quickly in a single pass with the MF-SE 3 slotting head (special accessory). In order to match wall panels to a predermined curve, mark the work to repeat as many times as necessery at 35 mm intervals.
The MF 26 cc can be used for grooving. The width of the cutter is adjustable in the range from 15.4 to 25 mm. When cutting crosswise grooves, typically for risers or shelves, use of the guide 400 is recommended.
Boards, struts and beams can quickly and easily chamfered up to 12mm with the MF-GF 90.
Cutting depth: 0 - 26 mm (0-1 inch)
Norminal speed - no load: 3600 - 6250 rpm
Expending Groove Cutter: 15 - 25 mm
Cutting speed: 39,9 m/s
Universal motor: 230v / 50 Hz
Nominal power input: 1400 w (1.9 hp)
Weight: 6.6 kg
1 x TCT sawblade 120 x 1.2/1.8 x 20mm, AT, 24 teeth
1 x Expanding groove cutter MF-VN 25
1 x Parallel guide fence
1 x Guide track 400
1 x Mains cable 4m