Trend T33A 230V M-Class Dust Extractor 1200W

Trend T33A Dust Extractor 230V 1200W Class M

M Class extractor with power take off for high performance hazardous dust capture

• CLASS M EXTRACTION Meets HSE Construction site regulations to capture microscopic harmful dust particles including silica and MDF dust
• 99.95% CAPTURE High performance H13 Pleated HEPA Filter System traps dust as fine as 0.3 microns and above
• 1500W AUTO-START POWER TAKE OFF (1000W on 115V MODEL) Allows the extractor to auto start when a power tool is connected with 3Ð5 second run on delay to clear residual debris
• WET AND DRY PICK UP Dual function pick up for dry materials and wet pick up with auto stop function when liquid capacity is reached
• PUSH BUTTON FILTER CLEANING Shake down function clears fine dust build up from the filter to maintain efficient suction power
• LARGE COLLECTION DRUM 25 litre dry/17 litre wet capacity for longer run times between emptying
• LARGE DUST BAG CAPACITY Captures bigger particles for increased efficiency and safe disposal
• LOW FLOW INDICATOR For filter and dust collection management, signals when the extraction power is low
• DURABLE CONSTRUCTION Heavy duty plastic tank ideal for liquid pick up and high impact protection
• DRAIN PORT Liquid drain off port at the bottom of the tank for easy emptying without lifting
• FULL TOOL KIT Comes supplied with a full set of cleaning tools for general vacuum cleaning purposes
• WIDE WORKING RANGE 5 metre hose and 5 metre cable for extended working distances from a power point
• WHEELED BASE Four swivel castors for easy manoeuvrability around the jobsite
• For UK sale only.

Dimensions:

• Rating=Trade
• Power input=1200 watt
• Voltage=230 volt
• Dust category*=M
• Tank capacity=25 L dry, 17 L wet
• Bag capacity=16.5 L
• Sound pressure Lpa=82 dB(A)
• Max suction=160 mbar
• Flow rate=23 l/s
• Negative pressure=16 Kpa
• Cable=5M
• Hose=5 M x 39mm OD
• * Vacuum cleaners of dust category to EN60335-2-69 for dry vacuuming of materials of exposure limit volume > 0.1 mg/m3 that are hazardous to ones health.
• End of life=See below for Environmental Policy link
• Vibration=<2.5
• Weight=8.34 kg
• Acoustic pressure Lwa=94 dB(A)
• Dimensions=625 x 380 mm
• Power tool adaptor OD=Taper 32 to 36 mm
• Synchronised Power take off=1500w max, 60w min

Supplied with:

• 1 x HEPA Cartridge filter
• 1 x 5 metre flexible hose
• 1 x Hard floor brush
• 1 x Round brush
• 1 x Crevice tool
• 1 x Curved metal tube
• 2 x Metal tube
• 1 x Power tool adaptor
• 1 x Synthetic filter bag