Home   About Us   Contact Us   Your Account   Email Offers   Hot Deals   Diary   Testimonials   Index Need some help? Speak to an advisor on: 020 8892 3813    
Trend Snappy complete range
Free Delivery/Next Day Delivery/One Hour Delivery Window/Loyalty Points
Subtotal £0.00 inc VAT
Items: 0
Over 10,000 lines held in stock - available for next day delivery! PLUS - FREE delivery on most orders over £99
Brand

Price






Featured Products
NOW £119.95 INC  £99.96 EXC
NOW £419.95 INC  £349.96 EXC
NOW £89.95 INC  £74.96 EXC

Trend Snappy complete range

Featured Products by Brand > Trend Machinery > Trend Snappy complete range
 
Snappy
Sort:
TREND SNAP/TH1/SET SNAPPY TOOL HOLDER 30 PC BIT SET £46.99 Tool Holders 


Heavy Duty Fabric Tool Holder With A Selection Of Assorted Snappy Tools.

With Elastic Pockets To Hold Snappy Shanks.

Supplied With A Snappy Pencil. Tool Holders Have A Belt St
TRETH1SET
ONLY £46.99 inc
£39.16 exc
In Stock
Trend
Tool Holders Heavy Duty Fabric Tool Holder With A Selection Of Assorted Snappy Tools. With Elastic Pockets To Hold Snappy Shanks. Supplied With A Snappy Pencil. Tool Holders Have A Belt St
View Details

TREND SNAP/TH2/SET SNAPPY TOOL HOLDER 60 PC BIT SET £79.99 Tool Holders 


Heavy Duty Fabric Tool Holder Available With Assorted Snappy Tools.

With Elastic Pockets To Hold Snappy Shanks. Supplied With A Snappy Pencil. Tool Holders Have A Belt Strap And
TRETH2SET
Was £89.99 inc
Now £79.99 inc
£66.66 exc
In Stock
SAVE £10.00
Trend
Tool Holders Heavy Duty Fabric Tool Holder Available With Assorted Snappy Tools. With Elastic Pockets To Hold Snappy Shanks. Supplied With A Snappy Pencil. Tool Holders Have A Belt Strap And
View Details

TREND HOLDER FOR 60PC SET £11.94 Heavy Duty Fabric Tool Holder.
With Elastic Pockets To Hold Snappy Shanks. 
Supplied With A Snappy Pencil. Tool Holders Have A Belt Strap And Are Velcro Fastening.

Dimensions:
Holding Capacity=6
TRESNAPTH2
ONLY £11.94 inc
£9.95 exc
In Stock
Trend
Heavy Duty Fabric Tool Holder. With Elastic Pockets To Hold Snappy Shanks. Supplied With A Snappy Pencil. Tool Holders Have A Belt Strap And Are Velcro Fastening. Dimensions: Holding Capacity=6
View Details

TREND N08 4PC  SNAPPY SET £26.90 This Set Incorporates One Of Each Of The Four Main Lines And Is Designed For No.8 Screw Size.dimensions:screw Size=no.8quick Chuck Drill Countersinkno.2 Pozidrive Bitdrill Bit Guideshank Diameter=1/4
TRENO8SET
ONLY £26.90 inc
£22.42 exc
In Stock
Trend
This Set Incorporates One Of Each Of The Four Main Lines And Is Designed For No.8 Screw Size.dimensions:screw Size=no.8quick Chuck Drill Countersinkno.2 Pozidrive Bitdrill Bit Guideshank Diameter=1/4
View Details

TREND POCKET HOLE JIG SNAPPY DRILL BIT 9.5MM £15.60 Trend Pocket Hole Jig Snappy Drill Bit 9.5mm

Snappy Shank 3/8\" Drill Bit.
A 9.5mm Diameter Stepped High Speed Steel Drill.
Supplied With Depth Setting Collar.
TRESNAPPHD95
ONLY £15.60 inc
£13.00 exc
In Stock
Trend
Trend Pocket Hole Jig Snappy Drill Bit 9.5mm Snappy Shank 3/8" Drill Bit. A 9.5mm Diameter Stepped High Speed Steel Drill. Supplied With Depth Setting Collar.
View Details

TREND SNAP/ASA/2 SNAPPY ANGLE SCREWDRIVER ATTACH MK2 £45.67 90 Degree Angled Screwdriver Attachment Allows Access To Tight Corners. Quick Change Chuck Ensure Tool Is Held Securely. Use With Bit Holders, Direct Drive Or Insert Screwdriver Bits, Hex Drills And D
TRESNAPASA2
ONLY £45.67 inc
£38.06 exc
In Stock
Trend
90 Degree Angled Screwdriver Attachment Allows Access To Tight Corners. Quick Change Chuck Ensure Tool Is Held Securely. Use With Bit Holders, Direct Drive Or Insert Screwdriver Bits, Hex Drills And D
View Details

TREND SNAP/ASA/3 SNAPPY COMPACT ANGLE SCREWDRIVER ATTACHMENT £41.59 Compact 90¡ Angle Driver With Quick Change Shanks That Accepts Power Drive 50mm Bits And 25mm Insert Bits.allows Access To Tight Corners.use In Cordless And Corded Drills.use With Screwdriver Bits In
TRESNAPASA3
ONLY £41.59 inc
£34.66 exc
In Stock
Trend
Compact 90¡ Angle Driver With Quick Change Shanks That Accepts Power Drive 50mm Bits And 25mm Insert Bits.allows Access To Tight Corners.use In Cordless And Corded Drills.use With Screwdriver Bits In
View Details

TREND SNAP/BH/SDS SNAPPY SDS PLUS BIT HOLDER 80MM     £14.28 Magnetic Holder For 25mm Insert Bits For Sds Plus Drills. Hammer Action Must Be Switched Off When Used.quick Release Fitting To Hold Insert Bits.dimensions:d=14 Mmoverall Length=80 Mmshank Length=1/4
TRESNAPBHSDS
ONLY £14.28 inc
£11.90 exc
In Stock
Trend
Magnetic Holder For 25mm Insert Bits For Sds Plus Drills. Hammer Action Must Be Switched Off When Used.quick Release Fitting To Hold Insert Bits.dimensions:d=14 Mmoverall Length=80 Mmshank Length=1/4
View Details

TREND SNAP/CB/1TC SNAPPY TC CBORE 4MM X 9.5MM        £17.07 Counterbore With A Slow Spiral Drill Fitted. Tungsten Carbide Tipped For Use In Abrasive Materials.dimensions:d=5/32 Inchd=4 Mmd2=3/8 Inchd2=9.5 Mmc=8 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/4
TRESNAPCB1TC
ONLY £17.07 inc
£14.23 exc
In Stock
Trend
Counterbore With A Slow Spiral Drill Fitted. Tungsten Carbide Tipped For Use In Abrasive Materials.dimensions:d=5/32 Inchd=4 Mmd2=3/8 Inchd2=9.5 Mmc=8 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/4
View Details

TREND SNAP/CB/2TC SNAPPY TC CBORE 4.75MM X 9.5MM     £17.07 Counterbore With A Slow Spiral Drill Fitted. Tungsten Carbide Tipped For Use In Abrasive Materials.dimensions:d=3/16 Inchd=4.75 Mmd2=3/8 Inchd2=9.5 Mmc=8 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1
TRESNAPCB2TC
ONLY £17.07 inc
£14.23 exc
In Stock
Trend
Counterbore With A Slow Spiral Drill Fitted. Tungsten Carbide Tipped For Use In Abrasive Materials.dimensions:d=3/16 Inchd=4.75 Mmd2=3/8 Inchd2=9.5 Mmc=8 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1
View Details

TREND SNAP/CB/3TC SNAPPY TC CBORE 4.75MM X 12.7MM    £17.69 Counterbore With A Slow Spiral Drill Fitted. Tungsten Carbide Tipped For Use In Abrasive Materials.dimensions:d=3/16 Inchd=4.75 Mmd2=1/2 Inchd2=12.7 Mmc=8 Mmshank Diameter=1/4 Inch Inchshank Diameter:
TRESNAPCB3TC
ONLY £17.69 inc
£14.74 exc
In Stock
Trend
Counterbore With A Slow Spiral Drill Fitted. Tungsten Carbide Tipped For Use In Abrasive Materials.dimensions:d=3/16 Inchd=4.75 Mmd2=1/2 Inchd2=12.7 Mmc=8 Mmshank Diameter=1/4 Inch Inchshank Diameter:
View Details

TREND SNAP/CB/4TC SNAPPY TC CBORE 6.35MM X 12.7MM    £18.41 Counterbore With A Slow Spiral Drill Fitted. Tungsten Carbide Tipped For Use In Abrasive Materials.dimensions:d=1/4 Inchd=6.35 Mmd2=1/2 Inchd2=12.7 Mmc=8 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1
TRESNAPCB4TC
ONLY £18.41 inc
£15.35 exc
In Stock
Trend
Counterbore With A Slow Spiral Drill Fitted. Tungsten Carbide Tipped For Use In Abrasive Materials.dimensions:d=1/4 Inchd=6.35 Mmd2=1/2 Inchd2=12.7 Mmc=8 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1
View Details

TREND SNAP/CB/5TC SNAPPY TC CBORE 6.35MM X 16MM      £19.61 Counterbore With A Slow Spiral Drill Fitted. Tungsten Carbide Tipped For Use In Abrasive Materials.dimensions:d=1/4 Inchd=6.35 Mmd2=5/8 Inchd2=16 Mmc=11 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/
TRESNAPCB5TC
ONLY £19.61 inc
£16.34 exc
In Stock
Trend
Counterbore With A Slow Spiral Drill Fitted. Tungsten Carbide Tipped For Use In Abrasive Materials.dimensions:d=1/4 Inchd=6.35 Mmd2=5/8 Inchd2=16 Mmc=11 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/
View Details

TREND SNAP/COL/PK1 SNAPPY DRILL DEPTH COLLAR PACK  6/8 £4.59 Drill Depth Setting Collar For 6mm, 8mm And 10mm Drill Bits.depth Collar Fits To Relief Of Drill Bit And Is Adjustable In Position To Suit Dowel Drilling Depth. Depth Collar Acts As A Stop.three Packd
TRESNAPCOLPK1
ONLY £4.59 inc
£3.83 exc
In Stock
Trend
Drill Depth Setting Collar For 6mm, 8mm And 10mm Drill Bits.depth Collar Fits To Relief Of Drill Bit And Is Adjustable In Position To Suit Dowel Drilling Depth. Depth Collar Acts As A Stop.three Packd
View Details

TREND SNAP/CS/10TC SNAPPY TC  3.25MM DRILL NO.10 SCREWS £11.49 Drill Countersinks - Tct
Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink. These Tools Can Be Used In Abrasive Materials Such As Laminated Chipboard. The Drills Produce Pilot H
TRECS10TC
ONLY £11.49 inc
£9.58 exc
In Stock
Trend
Drill Countersinks - Tct Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink. These Tools Can Be Used In Abrasive Materials Such As Laminated Chipboard. The Drills Produce Pilot H
View Details

TREND SNAP/CS/12TC SNAPPY TC  3.5MM DRILL NO.12 SCREW £11.49 Drill Countersinks - Tct
Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink. These Tools Can Be Used In Abrasive Materials Such As Laminated Chipboard. The Drills Produce Pilot H
TRECS12TC
ONLY £11.49 inc
£9.58 exc
In Stock
Trend
Drill Countersinks - Tct Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink. These Tools Can Be Used In Abrasive Materials Such As Laminated Chipboard. The Drills Produce Pilot H
View Details

TREND SNAP/CS/3MMTC SNAPPY COUNTERSINK 3MM X 9.5MM TCT  £12.65 Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill. This Tool Can Be Used In Abrasive Materials Such As Laminated Chipboard.the Drills Produce Pilo
TRESNAPCS3MMTC
ONLY £12.65 inc
£10.54 exc
In Stock
Trend
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill. This Tool Can Be Used In Abrasive Materials Such As Laminated Chipboard.the Drills Produce Pilo
View Details

TREND SNAP/CS/4MMTC SNAPPY COUNTERSINK 4MM X 9.5MM TCT  £12.65 Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill. This Tool Can Be Used In Abrasive Materials Such As Laminated Chipboard.the Drills Produce Pilo
TRESNAPCS4MMTC
ONLY £12.65 inc
£10.54 exc
In Stock
Trend
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill. This Tool Can Be Used In Abrasive Materials Such As Laminated Chipboard.the Drills Produce Pilo
View Details

TREND SNAP/CS/4TC SNAPPY TC 2MM DRILL NO.4 SCREW £11.49 Drill Countersinks - Tct
Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink. These Tools Can Be Used In Abrasive Materials Such As Laminated Chipboard. The Drills Produce Pilot H
TRECS4TC
ONLY £11.49 inc
£9.58 exc
In Stock
Trend
Drill Countersinks - Tct Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink. These Tools Can Be Used In Abrasive Materials Such As Laminated Chipboard. The Drills Produce Pilot H
View Details

TREND SNAP/CS/6MMTC SNAPPY COUNTERSINK 6MM X 12.7MM TCT £18.41 Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill. This Tool Can Be Used In Abrasive Materials Such As Laminated Chipboard.the Drills Produce Pilo
TRESNAPCS6MMTC
ONLY £18.41 inc
£15.35 exc
In Stock
Trend
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill. This Tool Can Be Used In Abrasive Materials Such As Laminated Chipboard.the Drills Produce Pilo
View Details

TREND SNAP/CS/6TC SNAPPY TC  2.5MM DRILL NO.6 SCREW £11.49 Drill Countersinks - Tct
Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink. These Tools Can Be Used In Abrasive Materials Such As Laminated Chipboard. The Drills Produce Pilot H
TRECS6TC
ONLY £11.49 inc
£9.58 exc
In Stock
Trend
Drill Countersinks - Tct Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink. These Tools Can Be Used In Abrasive Materials Such As Laminated Chipboard. The Drills Produce Pilot H
View Details

TREND SNAP/CS/8TC SNAPPY TC  2.75MM DRILL NO.8 SCREW £11.49 Drill Countersinks - Tct
Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink. These Tools Can Be Used In Abrasive Materials Such As Laminated Chipboard. The Drills Produce Pilot H
TRECS8TC
ONLY £11.49 inc
£9.58 exc
In Stock
Trend
Drill Countersinks - Tct Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink. These Tools Can Be Used In Abrasive Materials Such As Laminated Chipboard. The Drills Produce Pilot H
View Details

TREND SNAP/CS/SET SNAPPY 5 PIECE COUNTERSINK SET £22.99 Drill Countersink Set
This Pack Contain 5 Hss Snappy Drill Countersink Sizes. Also Available In Tct. 
Drill Countersinks - Hss
Snappy Countersinks Are Made Of Heat Treated Tool Steel With Hex Shaft
TRECSSET
ONLY £22.99 inc
£19.16 exc
In Stock
Trend
Drill Countersink Set This Pack Contain 5 Hss Snappy Drill Countersink Sizes. Also Available In Tct. Drill Countersinks - Hss Snappy Countersinks Are Made Of Heat Treated Tool Steel With Hex Shaft
View Details

TREND SNAP/CSDS/10TC SNAPPY TC NO 10 D/CSK CW DEPTH STOP £19.85 Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink With Adjustable Slow Spiral V Point Hss Drill And Non Marring Depth Stop.this Tool Can Be Used In Abrasive Materials Such As Lam
TRECSDS10TC
ONLY £19.85 inc
£16.54 exc
In Stock
Trend
Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink With Adjustable Slow Spiral V Point Hss Drill And Non Marring Depth Stop.this Tool Can Be Used In Abrasive Materials Such As Lam
View Details

TREND SNAP/CSDS/12TC SNAPPY TC NO 12 D/CSK CW DEPTH STOP £19.85 Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink With Adjustable Slow Spiral V Point Hss Drill And Non Marring Depth Stop.this Tool Can Be Used In Abrasive Materials Such As Lam
TRECSDS12TC
ONLY £19.85 inc
£16.54 exc
In Stock
Trend
Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink With Adjustable Slow Spiral V Point Hss Drill And Non Marring Depth Stop.this Tool Can Be Used In Abrasive Materials Such As Lam
View Details

TREND SNAP/CSDS/8TC SNAPPY TC NO 8 D/CSK CW DEPTH STOP  £19.85 Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink With Adjustable Slow Spiral V Point Hss Drill And Non Marring Depth Stop.this Tool Can Be Used In Abrasive Materials Such As Lam
TRECSDS8TC
ONLY £19.85 inc
£16.54 exc
In Stock
Trend
Tungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink With Adjustable Slow Spiral V Point Hss Drill And Non Marring Depth Stop.this Tool Can Be Used In Abrasive Materials Such As Lam
View Details

TREND SNAP/CSK/1 SNAPPY 82DEG COUNTERSINK TOOL STEEL £11.49 Hole Countersink
Single Flute 82 Degree Countersink For Countersinking Holes In Natural Timbers And Man-made Boards
TRECSK1
ONLY £11.49 inc
£9.58 exc
In Stock
Trend
Hole Countersink Single Flute 82 Degree Countersink For Countersinking Holes In Natural Timbers And Man-made Boards
View Details

TREND SNAP/CSK/3 SNAPPY DE-BURRING TOOL 7MM TO 20MM  £35.99 High Speed Steel De-burring Countersink For De-burring Metal Holes And For Countersinking In Wood.dimensions:d=7 Mm To 20 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexdiameter Metric: 7mm To 20
TRESNAPCSK3
ONLY £35.99 inc
£29.99 exc
In Stock
Trend
High Speed Steel De-burring Countersink For De-burring Metal Holes And For Countersinking In Wood.dimensions:d=7 Mm To 20 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexdiameter Metric: 7mm To 20
View Details

TREND SNAP/D/2 SNAPPY (1/16) HSS  DRILL AND ADAPTER £4.09 Drill Bits
The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck. Available Separately Or Imperial Set
TRED2
ONLY £4.09 inc
£3.41 exc
In Stock
Trend
Drill Bits The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck. Available Separately Or Imperial Set
View Details

TREND SNAP/D/2MM SNAPPY 2MM DRILL AND ADAPTER        £4.07 The Hss Drill Bit Is Gripped By A Spring Steel Collet Into The Hex Shaft.the Hex Shanks Snap Into The Quick Chuck.dimensions:d=5/64 Inchd=2 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexdiameter
TRESNAPD2MM
ONLY £4.07 inc
£3.39 exc
In Stock
Trend
The Hss Drill Bit Is Gripped By A Spring Steel Collet Into The Hex Shaft.the Hex Shanks Snap Into The Quick Chuck.dimensions:d=5/64 Inchd=2 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexdiameter
View Details

TREND SNAP/D/3 SNAPPY  (3/32) HSS DRILL AND ADAPTER £4.09 Drill Bits
The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck. Available Separately Or Imperial Set
TRED3
ONLY £4.09 inc
£3.41 exc
In Stock
Trend
Drill Bits The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck. Available Separately Or Imperial Set
View Details

TREND SNAP/D/4 SNAPPY  (1/8) HSS DRILL AND ADAPTER £4.09 Drill Bits
The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck. Available Separately Or Imperial Set
TRED4
ONLY £4.09 inc
£3.41 exc
In Stock
Trend
Drill Bits The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck. Available Separately Or Imperial Set
View Details

TREND SNAP/D/5 SNAPPY  (5/32) HSS DRILL AND ADAPTER £4.09 Drill Bits
The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck. Available Separately Or Imperial Set
TRED5
ONLY £4.09 inc
£3.41 exc
In Stock
Trend
Drill Bits The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck. Available Separately Or Imperial Set
View Details

TREND SNAP/D/6 SNAPPY  (3/16) HSS DRILL AND ADAPTER £4.21 Drill Bits
The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck. Available Separately Or Imperial Set
TRED6
ONLY £4.21 inc
£3.51 exc
In Stock
Trend
Drill Bits The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck. Available Separately Or Imperial Set
View Details

TREND SNAP/D/7 SNAPPY  (7/32) HSS DRILL AND ADAPTER £4.84 Drill Bits
The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck. Available Separately Or Imperial Set
TRED7
ONLY £4.84 inc
£4.03 exc
In Stock
Trend
Drill Bits The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck. Available Separately Or Imperial Set
View Details

TREND SNAP/D/8  SNAPPY  (1/4) HSS DRILL AND ADAPTER £4.84 Drill Bits
The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck. Available Separately Or Imperial Set
TRED8
ONLY £4.84 inc
£4.03 exc
In Stock
Trend
Drill Bits The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck. Available Separately Or Imperial Set
View Details

TREND SNAP/DB/PK1 SNAPPY CS DRILL BIT TEN PACK        £11.44 Spare Drills To Suit Trend Snappy Drill Countersinks. Ten Pack Comprising 2pcs Of Each Size.dimensions:d=5/64, 3/32, 7/64, 1/8 & 9/64 Inchd=2.0, 2.5, 2.75, 3.25 & 3.5mm
TRESNAPDBPK1
ONLY £11.44 inc
£9.53 exc
In Stock
Trend
Spare Drills To Suit Trend Snappy Drill Countersinks. Ten Pack Comprising 2pcs Of Each Size.dimensions:d=5/64, 3/32, 7/64, 1/8 & 9/64 Inchd=2.0, 2.5, 2.75, 3.25 & 3.5mm
View Details

TREND SNAP/DB18/10 SNAPPY 1/8  DRILL BIT TEN PACK      £13.95 Pack Of 10 Spare Drills To Suit The Drill Countersinks. Supplied In A Storage Tube.dimensions:d=1/8 Inchd=3.2 Mmdiameter Imperial: 1/8diameter Metric: 3.2
TRESNAPDB1810
ONLY £13.95 inc
£11.63 exc
In Stock
Trend
Pack Of 10 Spare Drills To Suit The Drill Countersinks. Supplied In A Storage Tube.dimensions:d=1/8 Inchd=3.2 Mmdiameter Imperial: 1/8diameter Metric: 3.2
View Details

TREND SNAP/DB332/10 SNAPPY 3/32 DRILL BIT TEN PACK      £11.44 Pack Of 10 Spare Drills To Suit The Drill Countersinks. Supplied In A Storage Tube.dimensions:d=3/32 Inchd=2.38 Mmdiameter Imperial: 3/32diameter Metric: 2.38
TRESNAPDB33210
ONLY £11.44 inc
£9.53 exc
In Stock
Trend
Pack Of 10 Spare Drills To Suit The Drill Countersinks. Supplied In A Storage Tube.dimensions:d=3/32 Inchd=2.38 Mmdiameter Imperial: 3/32diameter Metric: 2.38
View Details

TREND SNAP/DB564/10 SNAPPY 5/64 DRILL BIT TEN PACK      £11.44 Pack Of 10 Spare Drills To Suit The Drill Countersinks. Supplied In A Storage Tube.dimensions:d=5/64 Inchd=1.98 Mmdiameter Imperial: 5/64diameter Metric: 1.98
TRESNAPDB56410
ONLY £11.44 inc
£9.53 exc
In Stock
Trend
Pack Of 10 Spare Drills To Suit The Drill Countersinks. Supplied In A Storage Tube.dimensions:d=5/64 Inchd=1.98 Mmdiameter Imperial: 5/64diameter Metric: 1.98
View Details

TREND SNAP/DB764/10 SNAPPY 7/64 DRILL BIT TEN PACK      £11.44 Pack Of 10 Spare Drills To Suit The Drill Countersinks. Supplied In A Storage Tube.dimensions:d=7/64 Inchd=2.8 Mmdiameter Imperial: 7/64diameter Metric: 2.8
TRESNAPDB76410
ONLY £11.44 inc
£9.53 exc
In Stock
Trend
Pack Of 10 Spare Drills To Suit The Drill Countersinks. Supplied In A Storage Tube.dimensions:d=7/64 Inchd=2.8 Mmdiameter Imperial: 7/64diameter Metric: 2.8
View Details

TREND SNAP/DB964/10 SNAPPY 9/64 DRILL BIT TEN PACK      £13.95 Pack Of 10 Spare Drills To Suit The Drill Countersinks. Supplied In A Storage Tube.dimensions:d=9/64 Inchd=3.6 Mmdiameter Imperial: 9/64diameter Metric: 3.6
TRESNAPDB96410
ONLY £13.95 inc
£11.63 exc
In Stock
Trend
Pack Of 10 Spare Drills To Suit The Drill Countersinks. Supplied In A Storage Tube.dimensions:d=9/64 Inchd=3.6 Mmdiameter Imperial: 9/64diameter Metric: 3.6
View Details

TREND SNAP/DBG/SET SNAPPY DRILL BIT GUIDE 4PC SET £38.50 Drill Bit Guide Set
One Set Comprising A Quick Chuck And The Three Sizes Of Drill Bit Guides For The Accurate Fitting Of Hinges.

Drill Bit Guides
These Sprung-loaded Drill Bit Guides Are Self-cen
TREDBGSET
ONLY £38.50 inc
£32.08 exc
In Stock
Trend
Drill Bit Guide Set One Set Comprising A Quick Chuck And The Three Sizes Of Drill Bit Guides For The Accurate Fitting Of Hinges. Drill Bit Guides These Sprung-loaded Drill Bit Guides Are Self-cen
View Details

TREND SNAP/DD/10MM SNAPPY DOWEL DRILL 10MM DIA         £2.05 Hex Shank Carbon Steel Lip And Spur (brad Point) Dowel Drill Bit For Drilling Blind Holes In Wood.the Dowel Drills Are Roll Fluted To Allow Deep Boring, As They Improve Resistance To Clogging And Help
TRESNAPDD10MM
ONLY £2.05 inc
£1.71 exc
In Stock
Trend
Hex Shank Carbon Steel Lip And Spur (brad Point) Dowel Drill Bit For Drilling Blind Holes In Wood.the Dowel Drills Are Roll Fluted To Allow Deep Boring, As They Improve Resistance To Clogging And Help
View Details

TREND SNAP/DD/6MM SNAPPY DOWEL DRILL 6MM DIA          £1.84 Hex Shank Carbon Steel Lip And Spur (brad Point) Dowel Drill Bit For Drilling Blind Holes In Wood.the Dowel Drills Are Roll Fluted To Allow Deep Boring, As They Improve Resistance To Clogging And Help
TRESNAPDD6MM
ONLY £1.84 inc
£1.53 exc
In Stock
Trend
Hex Shank Carbon Steel Lip And Spur (brad Point) Dowel Drill Bit For Drilling Blind Holes In Wood.the Dowel Drills Are Roll Fluted To Allow Deep Boring, As They Improve Resistance To Clogging And Help
View Details

TREND SNAP/DD/8MM SNAPPY DOWEL DRILL 8MM DIA          £1.94 Hex Shank Carbon Steel Lip And Spur (brad Point) Dowel Drill Bit For Drilling Blind Holes In Wood.the Dowel Drills Are Roll Fluted To Allow Deep Boring, As They Improve Resistance To Clogging And Help
TRESNAPDD8MM
ONLY £1.94 inc
£1.62 exc
In Stock
Trend
Hex Shank Carbon Steel Lip And Spur (brad Point) Dowel Drill Bit For Drilling Blind Holes In Wood.the Dowel Drills Are Roll Fluted To Allow Deep Boring, As They Improve Resistance To Clogging And Help
View Details

TREND SNAP/DSB/6 SNAPPY DRILL SAW BIT 6MM X 90MM HSS £6.60 One Piece Quick Chnage Shnak Drill Saw.ideal For Drilling A Slot Or Opening Up Holes In Wood, Mdf And Plywood.rotary Reamer And File.the Hex Shanks Snap Into The Quick Chuck.dimensions:d1=6 Mmoverall
TRESNAPDSB6
ONLY £6.60 inc
£5.50 exc
In Stock
Trend
One Piece Quick Chnage Shnak Drill Saw.ideal For Drilling A Slot Or Opening Up Holes In Wood, Mdf And Plywood.rotary Reamer And File.the Hex Shanks Snap Into The Quick Chuck.dimensions:d1=6 Mmoverall
View Details

TREND SNAP/DWIPH2/2 SNAPPY DRYWALL 25MM PH NO2 2 PK     £4.21 A Pack Of Two 25mm No. 2 Phillips 25mm Insert Bits With Depth Stop For Drywall.plastic Depth Stop Will Not Corrode Ust And Will Therefore Not Tear The Drywall Paper.forged High Grade Chrome-vanadium S
TRESNAPDWIPH22
ONLY £4.21 inc
£3.51 exc
In Stock
Trend
A Pack Of Two 25mm No. 2 Phillips 25mm Insert Bits With Depth Stop For Drywall.plastic Depth Stop Will Not Corrode Ust And Will Therefore Not Tear The Drywall Paper.forged High Grade Chrome-vanadium S
View Details

TREND SNAP/FB/10 SNAPPY FLAT BIT 10MM £3.38 Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
TREFB10
ONLY £3.38 inc
£2.82 exc
In Stock
Trend
Flat Bits An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
View Details

TREND SNAP/FB/12 SNAPPY FLAT BIT 12MM £3.87 Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
TREFB12
ONLY £3.87 inc
£3.23 exc
In Stock
Trend
Flat Bits An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
View Details

TREND SNAP/FB/14 SNAPPY FLAT BIT 14MM £3.87 Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
TREFB14
ONLY £3.87 inc
£3.22 exc
In Stock
Trend
Flat Bits An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
View Details

TREND SNAP/FB/16 SNAPPY FLAT BIT 16MM £3.87 Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
TREFB16
ONLY £3.87 inc
£3.23 exc
In Stock
Trend
Flat Bits An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
View Details

TREND SNAP/FB/19 SNAPPY FLAT BIT 19MM £4.48 Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
TREFB19
ONLY £4.48 inc
£3.73 exc
In Stock
Trend
Flat Bits An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
View Details

TREND SNAP/FB/20 SNAPPY FLAT BIT 20MM                £4.46 An Economical Bit For Cutting Quick Holes In Timber.with Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers.dimensions:d=20 Mmol=152 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexd
TRESNAPFB20
ONLY £4.46 inc
£3.72 exc
In Stock
Trend
An Economical Bit For Cutting Quick Holes In Timber.with Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers.dimensions:d=20 Mmol=152 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexd
View Details

TREND SNAP/FB/22 SNAPPY FLAT BIT 22MM £4.48 Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
TREFB22
ONLY £4.48 inc
£3.73 exc
In Stock
Trend
Flat Bits An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
View Details

TREND SNAP/FB/25 SNAPPY FLAT BIT 25MM £4.48 Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
TREFB25
ONLY £4.48 inc
£3.74 exc
In Stock
Trend
Flat Bits An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
View Details

TREND SNAP/FB/32 SNAPPY FLAT BIT 32MM £5.08 Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
TREFB32
ONLY £5.08 inc
£4.23 exc
In Stock
Trend
Flat Bits An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
View Details

TREND SNAP/FB/38 SNAPPY FLAT BIT 38MM £5.68 Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
TREFB38
ONLY £5.68 inc
£4.73 exc
In Stock
Trend
Flat Bits An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
View Details

TREND SNAP/FB/8 SNAPPY FLAT BIT 8MM £3.27 Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
TREFB8
ONLY £3.27 inc
£2.73 exc
In Stock
Trend
Flat Bits An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers
View Details

TREND SNAP/FB/EXT SNAPPY 300MM FLAT BIT EXTENSION     £9.51 Flat Bit Extension. Minimum Diameter Of Flat Bit That Can Be Used Is 16.0mm.dimensions:overall Length=300 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexoverall Length Metric: 300
TRESNAPFBEXT
ONLY £9.51 inc
£7.93 exc
In Stock
Trend
Flat Bit Extension. Minimum Diameter Of Flat Bit That Can Be Used Is 16.0mm.dimensions:overall Length=300 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexoverall Length Metric: 300
View Details

TREND SNAP/FB2/SET SNAPPY 5PC 300MM FLAT BIT SET       £25.99 A Five Piece Extra Long 300mm Long Flat Bit Set.dimensions:overall Length=300 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexoverall Length Metric: 300
TRESNAPFB2SET
ONLY £25.99 inc
£21.66 exc
In Stock
Trend
A Five Piece Extra Long 300mm Long Flat Bit Set.dimensions:overall Length=300 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexoverall Length Metric: 300
View Details

TREND SNAP/FS/10 SNAPPY FORSTNER 10MM £11.49 Forstners
High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. They Will Also Drill Overlapping Holes. They Have An 86mm O
TREFS10
ONLY £11.49 inc
£9.58 exc
In Stock
Trend
Forstners High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. They Will Also Drill Overlapping Holes. They Have An 86mm O
View Details

TREND SNAP/FS/12 SNAPPY FORSTNER 12MM £11.49 Forstners
High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. They Will Also Drill Overlapping Holes. They Have An 86mm O
TREFS12
ONLY £11.49 inc
£9.58 exc
In Stock
Trend
Forstners High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. They Will Also Drill Overlapping Holes. They Have An 86mm O
View Details

TREND SNAP/FS/15 SNAPPY FORSTNER 15MM £12.70 Forstners
High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. They Will Also Drill Overlapping Holes. They Have An 86mm O
TREFS15
ONLY £12.70 inc
£10.58 exc
In Stock
Trend
Forstners High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. They Will Also Drill Overlapping Holes. They Have An 86mm O
View Details

TREND SNAP/FS/16 SNAPPY FORSTNER 16MM £13.43 Forstners
High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. They Will Also Drill Overlapping Holes. They Have An 86mm O
TREFS16
ONLY £13.43 inc
£11.19 exc
In Stock
Trend
Forstners High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. They Will Also Drill Overlapping Holes. They Have An 86mm O
View Details

TREND SNAP/FS/18 SNAPPY FORSTNER 18MM £13.43 Forstners
High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. They Will Also Drill Overlapping Holes. They Have An 86mm O
TREFS18
ONLY £13.43 inc
£11.19 exc
In Stock
Trend
Forstners High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. They Will Also Drill Overlapping Holes. They Have An 86mm O
View Details

TREND SNAP/FS/22 SNAPPY FORSTNER 22MM £14.02 Forstners
High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. They Will Also Drill Overlapping Holes. They Have An 86mm O
TREFS22
ONLY £14.02 inc
£11.68 exc
In Stock
Trend
Forstners High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. They Will Also Drill Overlapping Holes. They Have An 86mm O
View Details

TREND SNAP/FS/25 SNAPPY FORSTNER 25MM £17.53 Forstners
High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. They Will Also Drill Overlapping Holes. They Have An 86mm O
TREFS25
ONLY £17.53 inc
£14.61 exc
In Stock
Trend
Forstners High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. They Will Also Drill Overlapping Holes. They Have An 86mm O
View Details

TREND SNAP/FS/32 SNAPPY FORSTNER 32MM                £19.23 High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.for Use With The Trend Snappy Quick Chuck.will Also Drill Overlapping Holes. Dimensions:d=32 Mmol=80 Mmshank
TREFS32
ONLY £19.23 inc
£16.03 exc
In Stock
Trend
High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.for Use With The Trend Snappy Quick Chuck.will Also Drill Overlapping Holes. Dimensions:d=32 Mmol=80 Mmshank
View Details

TREND SNAP/HEX/B SNAP HEX BIT BALL END 4MM 5MM 6MM   £14.44 A 50mm Ball End Hex Screwdriver Bits. The Ball Hex Allows A Working Angle Up To 20 Degree.dimensions:overall Length=50 Mmsize A/f=4 Mm For M5-m6 Socket Scw & M8 Set Scwsize A/f=5 Mm For M6-m8 Sock
TRESNAPHEXB
ONLY £14.44 inc
£12.03 exc
In Stock
Trend
A 50mm Ball End Hex Screwdriver Bits. The Ball Hex Allows A Working Angle Up To 20 Degree.dimensions:overall Length=50 Mmsize A/f=4 Mm For M5-m6 Socket Scw & M8 Set Scwsize A/f=5 Mm For M6-m8 Sock
View Details

TREND SNAP/HKLC/6 SNAPPY HEX KEYLESS CHUCK 6MM CAP    £15.23 Keyless Chuck That Can Be Used In Quick Chucks And Impact Drivers To Hold Parallel Shank Drills Bits Up To 1/4 Inch. Clamping Capacity 0.8mm (1/32 Inch) To 6mm (1/4 Inch). Enhanced Gripping Power When
TREHKLC6
ONLY £15.23 inc
£12.69 exc
In Stock
Trend
Keyless Chuck That Can Be Used In Quick Chucks And Impact Drivers To Hold Parallel Shank Drills Bits Up To 1/4 Inch. Clamping Capacity 0.8mm (1/32 Inch) To 6mm (1/4 Inch). Enhanced Gripping Power When
View Details

TREND SNAP/IPZ2/20 SNAPPY 25MM BIT POZI NO2 (PACK OF 20) £15.51 A Pack Of Twenty 25mm No. 2 Pozi Insert Bits Titanium Nitride Coating (tin) Coated.they Have A Round Shaft To Reduce Breakage Giving Excellent Torque Transmission And Extended Life Time.
Suitable For
TRESNAPIPZ220
ONLY £15.51 inc
£12.92 exc
In Stock
Trend
A Pack Of Twenty 25mm No. 2 Pozi Insert Bits Titanium Nitride Coating (tin) Coated.they Have A Round Shaft To Reduce Breakage Giving Excellent Torque Transmission And Extended Life Time. Suitable For
View Details

TREND SNAP/MD/5 SNAPPY MASONRY DRILL 5MMX105MM TC £3.52 Trend Snap/md/5 Snappy Masonry Drill 5mm X 105mm Tc

Tungsten Masonry For Popular Wall Plugs.
TREMD5
ONLY £3.52 inc
£2.93 exc
In Stock
Trend
Trend Snap/md/5 Snappy Masonry Drill 5mm X 105mm Tc Tungsten Masonry For Popular Wall Plugs.
View Details

TREND SNAP/MD/6 SNAPPY MASONRY DRILL 6MMX120MM TC £3.52 Trend Snap/md/6 Snappy Masonry Drill 6mm X 120mm Tc

Tungsten Masonry For Popular Wall Plugs.
TREMD6
ONLY £3.52 inc
£2.93 exc
In Stock
Trend
Trend Snap/md/6 Snappy Masonry Drill 6mm X 120mm Tc Tungsten Masonry For Popular Wall Plugs.
View Details

TREND SNAP/MD/7 SNAPPY MASONRY DRILL 7MMX123MM TC £3.52 Trend Snap/md/5 Snappy Masonry Drill 7mm X 123mm Tc

Tungsten Masonry For Popular Wall Plugs.
TREMD7
ONLY £3.52 inc
£2.93 exc
In Stock
Trend
Trend Snap/md/5 Snappy Masonry Drill 7mm X 123mm Tc Tungsten Masonry For Popular Wall Plugs.
View Details

TREND SNAP/MD/8 SNAPPY MASONRY DRILL 8MMX142MM TC £3.52 Trend Snap/md/5 Snappy Masonry Drill 8mm X 142mm Tc

Tungsten Masonry For Popular Wall Plugs.
TREMD8
ONLY £3.52 inc
£2.93 exc
In Stock
Trend
Trend Snap/md/5 Snappy Masonry Drill 8mm X 142mm Tc Tungsten Masonry For Popular Wall Plugs.
View Details

TREND SNAP/MD1/SET SNAPPY MASONRY DRILL 4PC SET 5-8MM £10.89 Trend Snap/md1/set Snappy Masonry Drill 4pc Set 5-8mm

Tungsten Masonry For Popular Wall Plugs.
TREMD1SET
ONLY £10.89 inc
£9.07 exc
In Stock
Trend
Trend Snap/md1/set Snappy Masonry Drill 4pc Set 5-8mm Tungsten Masonry For Popular Wall Plugs.
View Details

TREND SNAP/MD3/SET SNAPPY MASONRY DRILL SET 8PC        £21.21 Tungsten Carbide Tipped Masonry Drill Bit Set In Tool Holder.unique Tool Holder Includes Removable Inner Section With Velcro Elasticated Cartridges To Accept An Extra 8 Hex Power Drive Shanks And 8 In
TRESNAPMD3SET
ONLY £21.21 inc
£17.68 exc
In Stock
Trend
Tungsten Carbide Tipped Masonry Drill Bit Set In Tool Holder.unique Tool Holder Includes Removable Inner Section With Velcro Elasticated Cartridges To Accept An Extra 8 Hex Power Drive Shanks And 8 In
View Details

TREND SNAP/ND/SET SNAPPY NUTDRIVER 5PC SET            £33.11 A 5 Piece Set Of High Quality Magnetic Nut Drivers. Ideal For Bolts And Nuts.driver Sizes Of 5.5mm, 7mm, 8mm, 10mm And 13mm A/f.will Also Suit He Head Self Tapping Screws And Coach Screws.dimensions:o
TRESNAPNDSET
ONLY £33.11 inc
£27.59 exc
In Stock
Trend
A 5 Piece Set Of High Quality Magnetic Nut Drivers. Ideal For Bolts And Nuts.driver Sizes Of 5.5mm, 7mm, 8mm, 10mm And 13mm A/f.will Also Suit He Head Self Tapping Screws And Coach Screws.dimensions:o
View Details

TREND SNAP/OFLD SNAPPY OFFLINE DRIVER £11.44 Use Drill Next To Walls. Drill And Fixes In Tight Spaces. Outer Sleeve Rotates Allowing Secure Positioning. Shaft Swivels To 15 Degree Angle. Accepts Both Inset Bits And Direct Drive Bits.dimensions:s
TRESNAPOFLD
ONLY £11.44 inc
£9.53 exc
In Stock
Trend
Use Drill Next To Walls. Drill And Fixes In Tight Spaces. Outer Sleeve Rotates Allowing Secure Positioning. Shaft Swivels To 15 Degree Angle. Accepts Both Inset Bits And Direct Drive Bits.dimensions:s
View Details

TREND SNAP/PC/10T SNAPPY TUBE PLUG CUTTER 10MM        £15.89 Made From Tool Steel They Allow For Longer Plugs To Be Drilled. Plugs Are Parallel Sided. Recommended For Use With A Pillar Drill.dimensions:shank Diameter=1/4 Inchplug Size=10 Mmshank Diameter: 1/4di
TRESNAPPC10T
ONLY £15.89 inc
£13.24 exc
In Stock
Trend
Made From Tool Steel They Allow For Longer Plugs To Be Drilled. Plugs Are Parallel Sided. Recommended For Use With A Pillar Drill.dimensions:shank Diameter=1/4 Inchplug Size=10 Mmshank Diameter: 1/4di
View Details

TREND SNAP/PC/12 SNAPPY 1/2in DIA PLUG CUTTER £14.63 Plug Cutters 
For Cutting Plugs In Wood. Two Sizes: 3/8\" (9.5 Mm)to Suit Cs4 To Cs10 And 1/2\" (12.7 Mm) To Suit Cs12 Snappy Range Of Hex Drill Countersinks
TREPC12
ONLY £14.63 inc
£12.19 exc
In Stock
Trend
Plug Cutters For Cutting Plugs In Wood. Two Sizes: 3/8" (9.5 Mm)to Suit Cs4 To Cs10 And 1/2" (12.7 Mm) To Suit Cs12 Snappy Range Of Hex Drill Countersinks
View Details

TREND SNAP/PC/38 SNAPPY 3/8in DIA PLUG CUTTER £11.49 Plug Cutters
For Cutting Plugs In Wood. Two Sizes: 3/8\" (9.5 Mm)to Suit Cs4 To Cs10 And 1/2\" (12.7 Mm) To Suit Cs12 Snappy Range Of Hex Drill Countersinks
TREPC38
ONLY £11.49 inc
£9.58 exc
In Stock
Trend
Plug Cutters For Cutting Plugs In Wood. Two Sizes: 3/8" (9.5 Mm)to Suit Cs4 To Cs10 And 1/2" (12.7 Mm) To Suit Cs12 Snappy Range Of Hex Drill Countersinks
View Details

TREND SNAP/PH/2A SNAPPY PHILLIPS NO 2 BIT 150MM OL   £7.11 Extra Long Phillips Screwdriver Bits For Use With Trend Snappy Quick Chuck.dimensions:ol=150 Mmsize=phillips No.2shank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexdiameter 2 Metric: Ph2overall Length
TRESNAPPH2A
ONLY £7.11 inc
£5.92 exc
In Stock
Trend
Extra Long Phillips Screwdriver Bits For Use With Trend Snappy Quick Chuck.dimensions:ol=150 Mmsize=phillips No.2shank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexdiameter 2 Metric: Ph2overall Length
View Details

TREND SNAP/PZ/4 SNAPPY POZI NO 4 50MM OL TWO PACK   £7.11 A Pack Of Two Power Drive No. 4 Pozi Screwdriver Bits. Ideal For No. 10 Window Anchors And Frame Fixers.dimensions:ol=50 Mmsize=pozi No.4shank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexdiameter 2 Me
TRESNAPPZ4
ONLY £7.11 inc
£5.92 exc
In Stock
Trend
A Pack Of Two Power Drive No. 4 Pozi Screwdriver Bits. Ideal For No. 10 Window Anchors And Frame Fixers.dimensions:ol=50 Mmsize=pozi No.4shank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexdiameter 2 Me
View Details

TREND SNAP/QC3 SNAPPY QUICK CHUCK LONG 3in £12.70 Two New Extra Long Chucks 3\" And 6\" In Length With Smaller Diameter Head (18mm) To Give Ease Of Access. These Two New Chucks Will Accept Both Direct Drive And Insert Type Bits. Can Be Fitted To The Qu
TREQC3
ONLY £12.70 inc
£10.58 exc
In Stock
Trend
Two New Extra Long Chucks 3" And 6" In Length With Smaller Diameter Head (18mm) To Give Ease Of Access. These Two New Chucks Will Accept Both Direct Drive And Insert Type Bits. Can Be Fitted To The Qu
View Details

TREND SNAP/QC6 SNAPPY QUICK CHUCK EX-LONG 6in £14.63 Two New Extra Long Chucks 3\" And 6\" In Length With Smaller Diameter Head (18mm) To Give Ease Of Access. These Two New Chucks Will Accept Both Direct Drive And Insert Type Bits. Can Be Fitted To The Qu
TREQC6
ONLY £14.63 inc
£12.19 exc
In Stock
Trend
Two New Extra Long Chucks 3" And 6" In Length With Smaller Diameter Head (18mm) To Give Ease Of Access. These Two New Chucks Will Accept Both Direct Drive And Insert Type Bits. Can Be Fitted To The Qu
View Details

TREND SNAP/QCM SNAPPY QUICK CHUCK MAGNETIC 2in £14.77 Quick Chuck
The Snappy System Starts With The Quick Chuck. This Is Fitted Into A Standard 3/8\" Key Or Keyless Chuck. Snappy Attachments Or Any Direct 1/4\" Hex Bits Can Then snap In Effortlessly. Si
TREQCM
ONLY £14.77 inc
£12.31 exc
In Stock
Trend
Quick Chuck The Snappy System Starts With The Quick Chuck. This Is Fitted Into A Standard 3/8" Key Or Keyless Chuck. Snappy Attachments Or Any Direct 1/4" Hex Bits Can Then 'snap' In Effortlessly. Si
View Details

TREND SNAP/QCSDS SNAPPY QUICK CHUCK SDS+ SHANK £15.96 Sds+ Quick Chuck

This New Chuck Has An Sds+ Shank Fitting For Sds Drills. Hammer Action Must Be Switched Off When Used.
TREQCSDS
ONLY £15.96 inc
£13.30 exc
In Stock
Trend
Sds+ Quick Chuck This New Chuck Has An Sds+ Shank Fitting For Sds Drills. Hammer Action Must Be Switched Off When Used.
View Details

TREND SNAP/RTA/7 SNAPPY RTA 7MM BOLT STEPPED DRILL   £14.57 Step Drill With Hardened Cutting Edges For Furniture Construction Bolts.supplied With Hss Slow Spiral Drill.dimensions:shank Diameter=1/4 Inch Hexboard Thickness=15 Mm Min.bolt Size=7 Mmstepped Drill
TRESNAPRTA7
ONLY £14.57 inc
£12.14 exc
In Stock
Trend
Step Drill With Hardened Cutting Edges For Furniture Construction Bolts.supplied With Hss Slow Spiral Drill.dimensions:shank Diameter=1/4 Inch Hexboard Thickness=15 Mm Min.bolt Size=7 Mmstepped Drill
View Details

TREND SNAP/SA/10 SNAPPY STUB AUGER 10mm £4.48 Stub Augers
New Short Series Augers With 105mm Overall Length, Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. Available From 8 To 25mm Diame
TRESA10
ONLY £4.48 inc
£3.74 exc
In Stock
Trend
Stub Augers New Short Series Augers With 105mm Overall Length, Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. Available From 8 To 25mm Diame
View Details

TREND SNAP/SA/13 SNAPPY STUB AUGER 13mm £5.08 Stub Augers
New Short Series Augers With 105mm Overall Length, Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. Available From 8 To 25mm Diame
TRESA13
ONLY £5.08 inc
£4.23 exc
In Stock
Trend
Stub Augers New Short Series Augers With 105mm Overall Length, Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. Available From 8 To 25mm Diame
View Details

TREND SNAP/SA/16 SNAPPY STUB AUGER 16mm £5.80 Stub Augers
New Short Series Augers With 105mm Overall Length, Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. Available From 8 To 25mm Diame
TRESA16
ONLY £5.80 inc
£4.84 exc
Available 24/48 Hours
Trend
Stub Augers New Short Series Augers With 105mm Overall Length, Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. Available From 8 To 25mm Diame
View Details

TREND SNAP/SA/19 SNAPPY STUB AUGER 19mm £5.80 Stub Augers
New Short Series Augers With 105mm Overall Length, Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. Available From 8 To 25mm Diame
TRESA19
ONLY £5.80 inc
£4.84 exc
In Stock
Trend
Stub Augers New Short Series Augers With 105mm Overall Length, Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. Available From 8 To 25mm Diame
View Details

TREND SNAP/SA/20 SNAPPY STUB AUGER 20mm £6.42 Stub Augers
New Short Series Augers With 105mm Overall Length, Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. Available From 8 To 25mm Diame
TRESA20
ONLY £6.42 inc
£5.35 exc
Available 24/48 Hours
Trend
Stub Augers New Short Series Augers With 105mm Overall Length, Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. Available From 8 To 25mm Diame
View Details

TREND SNAP/SA/22 SNAPPY STUB AUGER 22MM X 105MM      £6.69 Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. They Must Only Be Used With Torque Control Drills.dimensions:d=22 Mmol=105 Mmshank Diameter=1/
TRESA22
ONLY £6.69 inc
£5.57 exc
In Stock
Trend
Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. They Must Only Be Used With Torque Control Drills.dimensions:d=22 Mmol=105 Mmshank Diameter=1/
View Details

TREND SNAP/SA/25 SNAPPY STUB AUGER 25mm £7.62 Stub Augers
New Short Series Augers With 105mm Overall Length, Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. Available From 8 To 25mm Diame
TRESA25
ONLY £7.62 inc
£6.35 exc
In Stock
Trend
Stub Augers New Short Series Augers With 105mm Overall Length, Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. Available From 8 To 25mm Diame
View Details

TREND SNAP/SA/8 SNAPPY STUB AUGER 8mm £4.48 Stub Augers
New Short Series Augers With 105mm Overall Length, Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. Available From 8 To 25mm Diame
TRESA8
ONLY £4.48 inc
£3.74 exc
In Stock
Trend
Stub Augers New Short Series Augers With 105mm Overall Length, Ideal For Drilling Between Joists. Made From High Quality Carbon Steel With Screw Thread And Single Spur. Available From 8 To 25mm Diame
View Details

TREND SNAP/SB1/SET SNAPPY SCREWDRIVER BIT SET 1 £9.22 Magnetic Screwdriver Bit Set - 7 Piece
Comprises Magnetic Holder And 6 Assorted Screwdriver Bits In A Plastic Case/holder. Pozi® Bits Feature A Unique Torsion Zone To Minimise The Possibility Of Brea
TRESB1SET
ONLY £9.22 inc
£7.68 exc
In Stock
Trend
Magnetic Screwdriver Bit Set - 7 Piece Comprises Magnetic Holder And 6 Assorted Screwdriver Bits In A Plastic Case/holder. Pozi® Bits Feature A Unique Torsion Zone To Minimise The Possibility Of Brea
View Details

TREND SNAP/SB2/SET SNAPPY SCREWDRIVER BIT SET 2 31 PCS £13.82 Magnetic Screwdriver Bit Set - 31 Piece
Comprises Magnetic Holder And 30 Assorted 25mm Screwdriver Bits In A Plastic Case With Belt Clip. Includes 3 Pozi®, 3 Phillips®, 4 Flats, 10 Torx®, 7 Hex & 3 S
TRESB2SET
ONLY £13.82 inc
£11.52 exc
In Stock
Trend
Magnetic Screwdriver Bit Set - 31 Piece Comprises Magnetic Holder And 30 Assorted 25mm Screwdriver Bits In A Plastic Case With Belt Clip. Includes 3 Pozi®, 3 Phillips®, 4 Flats, 10 Torx®, 7 Hex & 3 S
View Details

TREND SNAP/SDA/3 SNAPPY SQUARE DRIVE 1/2 x 50MM        £8.96 Trend Snap/sda/3 Snappy Square Drive 1/2 X 50mm 
(socket Not Included)
 
Square Drive With Ball Locator.dimensions:a/f=1/2 Inchol=50 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexdi
TRESNAPSDA3
ONLY £8.96 inc
£7.47 exc
In Stock
Trend
Trend Snap/sda/3 Snappy Square Drive 1/2 X 50mm  (socket Not Included)   Square Drive With Ball Locator.dimensions:a/f=1/2 Inchol=50 Mmshank Diameter=1/4 Inch Hexshank Diameter: 1/4 Hexdi
View Details

TREND SNAP/TH3/SET SNAPPY TOOL HOLDER 60 PC IMPACT DRIVER £44.55 60 Piece Trend Snappy Impact Driver Set In Heavy Duty Fabric Tool Holder.


Ideal For Use With Impact Drivers.

With Elastic Pockets To Hold Trend Snappy Shanks. Supplied With A Snappy Pencil.
TRETH3SET
ONLY £44.55 inc
£37.13 exc
In Stock
Trend
60 Piece Trend Snappy Impact Driver Set In Heavy Duty Fabric Tool Holder. Ideal For Use With Impact Drivers. With Elastic Pockets To Hold Trend Snappy Shanks. Supplied With A Snappy Pencil.
View Details

TREND SNAPPY /DS/12 DEPTH STOP £3.01 Adjustable Depth Stop To Fit Snap/cs/12 Diameter.
Supplied With A Hex Key.



Dimensions:
Suitable For Snap/cs/12
Supplied With Hex Key
TREDS12
ONLY £3.01 inc
£2.51 exc
In Stock
Trend
Adjustable Depth Stop To Fit Snap/cs/12 Diameter. Supplied With A Hex Key. Dimensions: Suitable For Snap/cs/12 Supplied With Hex Key
View Details

TREND SNAPPY 1/4 NUT DRIVER £9.51 Ideal For Bolts.
Suitable For Use With Sheet Metal Screws.


Dimensions:
Af= 1/4 Inch
Overall Length=65mm
TRESNAPND635M
ONLY £9.51 inc
£7.93 exc
Available 24/48 Hours
Trend
Ideal For Bolts. Suitable For Use With Sheet Metal Screws. Dimensions: Af= 1/4 Inch Overall Length=65mm
View Details

TREND SNAPPY 10MM NUT DRIVER £9.51 Ideal For Bolts.

Dimensions:
Af=10mm
Overall Length=65mm
TRESNAPND10M
ONLY £9.51 inc
£7.93 exc
In Stock
Trend
Ideal For Bolts. Dimensions: Af=10mm Overall Length=65mm
View Details

TREND SNAPPY 13MM NUT DRIVER £11.44 Ideal For Bolts.

Dimensions:
Af=13mm
Overall Length=65mm
TRESNAPND13M
ONLY £11.44 inc
£9.53 exc
In Stock
Trend
Ideal For Bolts. Dimensions: Af=13mm Overall Length=65mm
View Details

TREND SNAPPY 18MM FLAT BIT £3.84 An Economical Bit For Cutting Quick Holes In Timber.
With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers.

Dimensions:
D= 18mm
Overall Length= 152mm
Shank Diameter= 1/4 Inch He
TREFB18
ONLY £3.84 inc
£3.20 exc
In Stock
Trend
An Economical Bit For Cutting Quick Holes In Timber. With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers. Dimensions: D= 18mm Overall Length= 152mm Shank Diameter= 1/4 Inch He
View Details

TREND SNAPPY 2.75MM DRILL BIT £3.50 Spare Hss Drill Bit For The Snap/dbg/7.

Dimensions:
D=7/64 Inch
TREWPD7L
ONLY £3.50 inc
£2.92 exc
In Stock
Trend
Spare Hss Drill Bit For The Snap/dbg/7. Dimensions: D=7/64 Inch
View Details

TREND SNAPPY 28MM HEX FORSTNER £17.07 High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.
For Use With The Snappy Quick Chuck.
Will Also Drill Overlapping Holes. 

Dimensions:
D= 28mm
Overall
TREFS28
ONLY £17.07 inc
£14.23 exc
Available 24/48 Hours
Trend
High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes. For Use With The Snappy Quick Chuck. Will Also Drill Overlapping Holes. Dimensions: D= 28mm Overall
View Details

TREND SNAPPY 2MM DRILL BIT £3.50 Spare Hss Drill Bit For The Snap/dbg/5.

Dimensions:
D=5/64 Inch
TREWPD5L
ONLY £3.50 inc
£2.92 exc
In Stock
Trend
Spare Hss Drill Bit For The Snap/dbg/5. Dimensions: D=5/64 Inch
View Details

TREND SNAPPY 3.5MM DRILL BIT £3.50 Spare Hss Drill Bit For The Snap/dbg/9.

Dimensions:
D=9/64 Inch
TREWPD9L
ONLY £3.50 inc
£2.92 exc
In Stock
Trend
Spare Hss Drill Bit For The Snap/dbg/9. Dimensions: D=9/64 Inch
View Details

TREND SNAPPY 3PC FLAT BIT SET 16/19/25MM £11.42 Trend Snappy 3pc Flat Bit Set 16/19/25mm
 
Economical Bits For Cutting Quick Holes In Timber.with Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers.dimensions:overall Length - 15
TREFB1SET
ONLY £11.42 inc
£9.52 exc
In Stock
Trend
Trend Snappy 3pc Flat Bit Set 16/19/25mm   Economical Bits For Cutting Quick Holes In Timber.with Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers.dimensions:overall Length - 15
View Details

TREND SNAPPY 4MM TC DRILL BIT £2.29 Spare Drill For The Snappy Counterbore Snap/cb/1tc.

Dimensions:
D=5/32 Inch
D=4mm


Diameter Imperial: 5/32

Diameter Metric: 4
TREWPD4C
ONLY £2.29 inc
£1.91 exc
Available 24/48 Hours
Trend
Spare Drill For The Snappy Counterbore Snap/cb/1tc. Dimensions: D=5/32 Inch D=4mm Diameter Imperial: 5/32 Diameter Metric: 4
View Details

TREND SNAPPY 5 PC FORSTNER SET 15-35MM £77.99 Trend Snappy 5 Pc Forstner Set 15-35mm
 
High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes.for Use With The Snappy Quick Chuck.will Also Drill Overlapp
TREFS1SET
ONLY £77.99 inc
£64.99 exc
Available 24/48 Hours
Trend
Trend Snappy 5 Pc Forstner Set 15-35mm   High Quality Forged And Ground Carbon Steel Short Forstner Bits For Drilling Accurate Holes.for Use With The Snappy Quick Chuck.will Also Drill Overlapp
View Details

TREND SNAPPY 5 PIECE  TCT COUNTERSINK SET £51.99 Drill Countersink Setthis Pack Contain 5 Tct Snappy Drill Countersink Sizes. Also Available In Hss.drill Countersinks - Tcttungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink. 
Th
TRECSTCSET
ONLY £51.99 inc
£43.33 exc
In Stock
Trend
Drill Countersink Setthis Pack Contain 5 Tct Snappy Drill Countersink Sizes. Also Available In Hss.drill Countersinks - Tcttungsten Carbide Tipped Version Of The Popular Snappy Drill Countersink. Th
View Details

TREND SNAPPY 6.35MM TC DRILL £3.50 Spare Drill For The Snappy Counterbores Snap/cb/4tc & Snap/cb/5tc.

Dimensions:
D=1/4 Inch
D=6.35mm


Diameter Imperial: 1/4

Diameter Metric: 6.35
TREWPD63C
ONLY £3.50 inc
£2.92 exc
Available 24/48 Hours
Trend
Spare Drill For The Snappy Counterbores Snap/cb/4tc & Snap/cb/5tc. Dimensions: D=1/4 Inch D=6.35mm Diameter Imperial: 1/4 Diameter Metric: 6.35
View Details

TREND SNAPPY 6MM NUT DRIVER £8.31 Ideal For Bolts.

Dimensions:
Af=6mm
Overall Length=65mm
TRESNAPND6M
ONLY £8.31 inc
£6.92 exc
Available 24/48 Hours
Trend
Ideal For Bolts. Dimensions: Af=6mm Overall Length=65mm
View Details

TREND SNAPPY 7 PIECE IMPERIAL DRILL SET £22.81 Drill Bit Set
These Are Packs Containing 7 Snappy Drill Sizes. They Are Available In Singles
Drill Bits
The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Sn
TREDSET
ONLY £22.81 inc
£19.01 exc
In Stock
Trend
Drill Bit Set These Are Packs Containing 7 Snappy Drill Sizes. They Are Available In Singles Drill Bits The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Sn
View Details

TREND SNAPPY 7MM NUT DRIVER £8.31 Ideal For Bolts.

Dimensions:
Af=7mm
Overall Length=65mm
TRESNAPND7M
ONLY £8.31 inc
£6.92 exc
Available 24/48 Hours
Trend
Ideal For Bolts. Dimensions: Af=7mm Overall Length=65mm
View Details

TREND SNAPPY 8MM NUT DRIVER £8.31 Ideal For Bolts.

Dimensions:
Af=8mm
Overall Length=65mm
TRESNAPND8M
ONLY £8.31 inc
£6.92 exc
In Stock
Trend
Ideal For Bolts. Dimensions: Af=8mm Overall Length=65mm
View Details

TREND SNAPPY CENTRING GUIDE 5/64 DRILL £9.56 Drill Bit Guides
These Sprung-loaded Drill Bit Guides Are Self-centering And Are Used For Accurate Drilling Of Holes In Hinges And Other Ironmongery To Ensure Exact Alignment. They Can Be Easily Dism
TREDBG5
ONLY £9.56 inc
£7.96 exc
In Stock
Trend
Drill Bit Guides These Sprung-loaded Drill Bit Guides Are Self-centering And Are Used For Accurate Drilling Of Holes In Hinges And Other Ironmongery To Ensure Exact Alignment. They Can Be Easily Dism
View Details

TREND SNAPPY CENTRING GUIDE 7/64 DRILL £9.56 Drill Bit Guides
These Sprung-loaded Drill Bit Guides Are Self-centering And Are Used For Accurate Drilling Of Holes In Hinges And Other Ironmongery To Ensure Exact Alignment. They Can Be Easily Dism
TREDBG7
ONLY £9.56 inc
£7.96 exc
In Stock
Trend
Drill Bit Guides These Sprung-loaded Drill Bit Guides Are Self-centering And Are Used For Accurate Drilling Of Holes In Hinges And Other Ironmongery To Ensure Exact Alignment. They Can Be Easily Dism
View Details

TREND SNAPPY COUNTERSINK HEX 3.25MM DRILL NO.10 SCREW £5.94 Trend Recess Countersink Hex - 3.25mm Drill No10 Screw

Heat Treated Tool Steel Countersinks With Hss Drills. Adjustable In Length And Produce A Couter Bored Hole 3/8\" Or 1/2\" In Diameter. 1/4\" Hex.
TRECS10
ONLY £5.94 inc
£4.95 exc
In Stock
Trend
Trend Recess Countersink Hex - 3.25mm Drill No10 Screw Heat Treated Tool Steel Countersinks With Hss Drills. Adjustable In Length And Produce A Couter Bored Hole 3/8" Or 1/2" In Diameter. 1/4" Hex.
View Details

TREND SNAPPY COUNTERSINK HEX 3.5MM DRILL NO 12 SCREW £5.94 Trend Recess Countersink Hex - 3.5mm Drill No12 Screw

Heat Treated Tool Steel Countersinks With Hss Drills. Adjustable In Length And Produce A Couter Bored Hole 3/8\" Or 1/2\" In Diameter. 1/4\" Hex.
TRECS12
ONLY £5.94 inc
£4.95 exc
In Stock
Trend
Trend Recess Countersink Hex - 3.5mm Drill No12 Screw Heat Treated Tool Steel Countersinks With Hss Drills. Adjustable In Length And Produce A Couter Bored Hole 3/8" Or 1/2" In Diameter. 1/4" Hex.
View Details

TREND SNAPPY DRILL BIT GUIDE NO12 £20.94 This Sprung-loaded Drill Bit Guide Is Self-centering.
Used For Accurate Drilling Of Holes In Hinges And Other Ironmongery To Ensure Exact Alignment.
They Can Be Easily Dismantled For Cleaning And Ar
TRESNAPDBG12
ONLY £20.94 inc
£17.45 exc
In Stock
Trend
This Sprung-loaded Drill Bit Guide Is Self-centering. Used For Accurate Drilling Of Holes In Hinges And Other Ironmongery To Ensure Exact Alignment. They Can Be Easily Dismantled For Cleaning And Ar
View Details

TREND SNAPPY FORSTNER 30MM £19.25 Trend Snappy Forstner 30mm
 
High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.for Use With The Snappy Quick Chuck.will Also Drill Overlapping Holes. Di
TREFS30
ONLY £19.25 inc
£16.04 exc
Available 24/48 Hours
Trend
Trend Snappy Forstner 30mm   High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.for Use With The Snappy Quick Chuck.will Also Drill Overlapping Holes. Di
View Details

TREND SNAPPY FORSTNER 35MM £19.25 Trend Snappy Forstner 35mm
 
High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.for Use With The Snappy Quick Chuck.will Also Drill Overlapping Holes. Di
TREFS35
ONLY £19.25 inc
£16.04 exc
In Stock
Trend
Trend Snappy Forstner 35mm   High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.for Use With The Snappy Quick Chuck.will Also Drill Overlapping Holes. Di
View Details

TREND SNAPPY MACHINE BIT 26MM DIA TC £12.08 Tct Machine Bits
For Drilling Blind Holes For Circular Hinges In Kitchen And Cabinet Doors. Recommended For Use In A Drill Stand
TREMB26TC
ONLY £12.08 inc
£10.07 exc
In Stock
Trend
Tct Machine Bits For Drilling Blind Holes For Circular Hinges In Kitchen And Cabinet Doors. Recommended For Use In A Drill Stand
View Details

TREND SNAPPY MACHINE BIT 35MM DIA TC £15.59 Tct Machine Bits
For Drilling Blind Holes For Circular Hinges In Kitchen And Cabinet Doors. Recommended For Use In A Drill Stand
TREMB35TC
ONLY £15.59 inc
£12.99 exc
In Stock
Trend
Tct Machine Bits For Drilling Blind Holes For Circular Hinges In Kitchen And Cabinet Doors. Recommended For Use In A Drill Stand
View Details

TREND SNAPPY QUICK CHUCK FOR USE WITH YANKEE 131B SCREWDRIVERS £15.96 Trend Snappy Quick Chuck For Use With Yankee 131b Screwdrivers

    New  Yankee Shank Quick Chuck
For 5/16\" (131b) Yankee® Spiral Ratchet Screwdrivers Only. The Quick Chuck Replaces A Standard Bit
TREQCYL
ONLY £15.96 inc
£13.30 exc
In Stock
Trend
Trend Snappy Quick Chuck For Use With Yankee 131b Screwdrivers New Yankee Shank Quick Chuck For 5/16" (131b) Yankee® Spiral Ratchet Screwdrivers Only. The Quick Chuck Replaces A Standard Bit
View Details

TREND SNAPPY SQUARE DRIVE ADAPTOR £6.38 Adaptor Has Pin Locator.

Dimensions:
To Suit 1/4 Inch Square Drive
Overall Length - 50mm
Shank Diameter - 1/4 Inch Hex

Overall Length Metric: 50
TRESDA1
ONLY £6.38 inc
£5.32 exc
In Stock
Trend
Adaptor Has Pin Locator. Dimensions: To Suit 1/4 Inch Square Drive Overall Length - 50mm Shank Diameter - 1/4 Inch Hex Overall Length Metric: 50
View Details

TREND SNAPPY STANDARD QUICK CHUCK £11.49 Trend Snappy Standard Quick Chuck

Quick Chuck
The Snappy System Starts With The Quick Chuck. This Is Fitted Into A Standard 3/8\" Key Or Keyless Chuck. Snappy Attachments Or Any Direct 1/4\" Hex Bit
TREQC
ONLY £11.49 inc
£9.58 exc
In Stock
Trend
Trend Snappy Standard Quick Chuck Quick Chuck The Snappy System Starts With The Quick Chuck. This Is Fitted Into A Standard 3/8" Key Or Keyless Chuck. Snappy Attachments Or Any Direct 1/4" Hex Bit
View Details

TREND SNAPPY T10/T15/T20 SET £4.46 High Grade Tool Steel Bits, Hardened For Ultimate Wear Resistance.the Bits Have 1/4 Inch Hex Shanks To Fit The Quick Chuck.dimensions:overall Length=50 Mmshank Diameter=1/4 Hexoverall Length Metric: 5
TRESNAPTXA
ONLY £4.46 inc
£3.72 exc
In Stock
Trend
High Grade Tool Steel Bits, Hardened For Ultimate Wear Resistance.the Bits Have 1/4 Inch Hex Shanks To Fit The Quick Chuck.dimensions:overall Length=50 Mmshank Diameter=1/4 Hexoverall Length Metric: 5
View Details

TREND SNAPPY T25/T30/T40 TORX SET £4.46 High Grade Tool Steel Bits, Hardened For Ultimate Wear Resistance.
The Bits Have 1/4 Inch Hex Shanks To Fit The Quick Chuck.

Dimensions:
Overall Length=50 Mm
Shank Diameter=1/4


Shank Diamet
TRESNAPTXB
ONLY £4.46 inc
£3.72 exc
In Stock
Trend
High Grade Tool Steel Bits, Hardened For Ultimate Wear Resistance. The Bits Have 1/4 Inch Hex Shanks To Fit The Quick Chuck. Dimensions: Overall Length=50 Mm Shank Diameter=1/4 Shank Diamet
View Details

TREND SNAPPY WOOD SAW SET 32 TO 64MM £14.52  
Piece Wood Saw Set
High Speed Carbon Steel Wood Saw Set For Use On Timber And Boards. Six Sizes Of Saw To Give Hole Sizes Of 32mm, 38mm, 44mm, 51mm, 57mm And 64mm Diameters. Drilling Depth Of 32mm
TREWS1SET
ONLY £14.52 inc
£12.10 exc
In Stock
Trend
Piece Wood Saw Set High Speed Carbon Steel Wood Saw Set For Use On Timber And Boards. Six Sizes Of Saw To Give Hole Sizes Of 32mm, 38mm, 44mm, 51mm, 57mm And 64mm Diameters. Drilling Depth Of 32mm
View Details

TREND SNAPPY/DS/38 DEPTH STOP £3.01 Adjustable Depth Stop To Fit Snappy Drill Countersink Snap/cs/4-10 Diameter. Supplied With A Hex Key.



Dimensions:
Suitable For Snap/cs/4 - 10
Supplied With Hex Key
TREDS38
ONLY £3.01 inc
£2.51 exc
In Stock
Trend
Adjustable Depth Stop To Fit Snappy Drill Countersink Snap/cs/4-10 Diameter. Supplied With A Hex Key. Dimensions: Suitable For Snap/cs/4 - 10 Supplied With Hex Key
View Details

TREND SNAPPY/SDA/2 SQ.ADAPTOR £8.31 Adaptor Has Pin Locator.

Dimensions:
To Suit 3/8 Inch Square Drive
Overall Length - 50mm
Shank Diameter - 1/4 Inch Hex

Overall Length Metric: 50
TRESDA2
ONLY £8.31 inc
£6.92 exc
In Stock
Trend
Adaptor Has Pin Locator. Dimensions: To Suit 3/8 Inch Square Drive Overall Length - 50mm Shank Diameter - 1/4 Inch Hex Overall Length Metric: 50
View Details

TREND WP-SNAP/D/18F SNAPPY DRILL BIT 1/8 FOR FLIP NO 10 £1.68 Replacement Drill For The Flip No10.dimensions:d=1/8 Inchdiameter Imperial: 1/8
TREWPSNAPD18F
ONLY £1.68 inc
£1.40 exc
In Stock
Trend
Replacement Drill For The Flip No10.dimensions:d=1/8 Inchdiameter Imperial: 1/8
View Details

TREND WP-SNAP/D/964S SNAPPY 9/64 DRILL BIT ONLY CSDS/12  £3.35 Replacement Drill For The Snap/csds/12tc.dimensions:d=9/64 Inchd=3.5 Mmol=52 Mmdiameter Imperial: 9/64diameter Metric: 3.5overall Length Metric: 52
TREWPSNAPD964S
ONLY £3.35 inc
£2.79 exc
In Stock
Trend
Replacement Drill For The Snap/csds/12tc.dimensions:d=9/64 Inchd=3.5 Mmol=52 Mmdiameter Imperial: 9/64diameter Metric: 3.5overall Length Metric: 52
View Details





D&M Tools are passionate about tools. As one of the largest independent tool retailers in the UK we supply professional power tools, hand tools, machinery and accessories . As tool specialists D&M Tools offer the very best brands in power tools such as Makita, Dewalt, Bosch, Metabo, Trend, Mafell, Panasonic, Festool and Fein and machinery brands such as Record Power, Startrite, & Scheppach . We stock a huge range of power tools including cordless drills, cordless saws, cordless combi drills, cordless screwdrivers as well as routers and angle grinders. Our machinery range includes, lathes, bandsaws, table saws, spindle moulders, planers and thicknessers and pillar drills as well as dust extractors, welders and water pumps. D&M tools also offer a huge range of hand tools and accessories from Irwin, Stanley, Bahco and many more including hammers, screwdrivers, hand saws, clamps, spanners, chisels and wrenches. We also stock an extensive selection of clothing and workwear including trousers, jackets, sweatshirts, hoodies, T-shirts, socks and footwear from top brand Snickers, Dickies, Jobman, Apache and DeWalt

Great brands, Great deals and Great range backed up with our famous
D&M service, why shop anywhere else?
 
Find us on

Trustpilot

Secured with
We Accept Visa, Mastercard,Switch,Maestro,Visa Electron and Delta. We also accept payment over the phone.

Click here for more details
© 2014 D&M Tools - 25th October 2014 02:24 PM
73-81 Heath Road, Twickenham, Middlesex, TW1 4AW