TREND UNIVERSAL SUBBASE C/W PINS & BUSH

TREND UNIVERSAL SUBBASE C/W PINS & BUSH

The UNIBASE enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes.

This moulded plastic sub-base will fit directly to most routers using the screws supplied. Line-up pins to suit 1/4", 1/2", 8mm and 12mm collets with a 16mm plastic guide bush are used to ensure concentricity of the cutter to the guide bush when fitting the sub-base.

INSTRUCTIONS FOR USE:

The line-up pin fits into the collet and is plunged through the router base. The line-up bush is fitted into the UNIBASE and screwed tightly down. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The UNIBASE screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10mm, increasing in 2mm increments up to 32mm (GB10-GB32). For larger diameter cutters a 40mm guide bush (GB40) is available.