Over 10,000 items in our stock ready for same day dispatch! FREE delivery for most orders over £99* 'Click & Collect' available from our Twickenham Superstore (*Excludes heavy or oversize items)
Faithfull Router Bit Tungsten Carbide Two Flute 12.7mm X 50mm 1/2in Shank
Features:
The Manufacturing Specification For Faithfull Router Bit Cutters Ensures That They Are Suitable For Use By All P
Trend 3/8l X 1/4 Tc Two Flute Cutter
Two Flute Tc Cutter Giving Good Chip Clearance.
Ideal For Shallow Lateral Routing Cuts Such As Recessing Hinges.
Corners Will Require
Trend 3/0 X 1/4 Tc Two Flute Cutter 4.7mm
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges
Trend 3/01 X 1/2 Tc Two Flute Cutter 4.0mm
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dimensions:
D=5/32 Inch
D=4 Mm
C=11 Mm
Ol=65 Mm
Shank Diamet
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dimensions:
D=1/4 Inch
D=6.3 Mm
C=19 Mm
Ol=51 Mm
Shank Diamet
Trend 3/08 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 3/08 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 3/10 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dime
Trend 3/12 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dime
Trend 3/2 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
D
Trend 3/2 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Trend 3/20 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dime
Trend 3/20 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dime
Trend 3/20l X 1/4 Tc Two Flute Pocket Cutter
A Two Flute Cutters With Extra Long Shanks.
Deep Grooving, Rebating And Mortising.
Useful For Template Work When Thickness Of Template
Trend 3/22 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dime
Trend 3/22 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dime
Trend 3/3 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Trend 3/4 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Trend 3/5 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Trend 3/5 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Trend 3/50 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tct Plunge Centre Tip.
Dimensions:
D=3/8 Inch
D=9.5 Mm
Trend 3/51 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 3/51 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 3/6 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 3/60 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 3/7 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 3/73 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tct Plunge Centre Tip.
Dimensions:
D=15/32 Inch
D=12 M
Trend 3/8 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 3/80 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 3/82 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 3/83 X 1/2 Tc Two Flute Cutter
Tct Extra Long Cutter.
Two Flutes Give A Clean Finish To Cut Edges.
Use Only On Professional Routers With 80mm Deep Plunge And Suitable One Pi
Trend 3/84l X 1/2 Tc Two Flute Pocket Cutter
A Two Flute Cutters With Extra Long Shanks.
Deep Grooving, Rebating And Mortising.
Useful For Template Work When Thickness Of Template
Trend 3/85 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Ideal Fo
Trend 3/9 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 4/0 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 4/1 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 4/2 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 4/2 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 4/20 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/21 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/22 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/24 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/29 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/29 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/30 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/4 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 4/40 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/5 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 4/5 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 4/50 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/51 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/6 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 4/60 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/70 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/70 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/80 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/90 X 1/2 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 46/05 X 1/4 Tc Mini Trim
Two Flute Mini-trim With Guide Bearing Will Profile Intricate Shapes.
Max. 2.0mm Trimming.
Ideal For Acrylic Trimming.
Dimensions:
D=1/4 Inch
D
Trend 46/07 X 1/4 Tc Mini Trim
Two Flute Mini-trim With Guide Bearing Will Profile Intricate Shapes.
Max. 2.0mm Trimming.
Ideal For Acrylic Trimming.
Dimensions:
D=1/4 Inch
D
Trend 3 Flute Trimmer
Three Flute Self-guiding For Extra Fine Trimming Of Laminate Or Plywood Overlay.
Dimensions:
D=1/2 Inch
D=12.7 Mm
C=1/2 Inch
C=12.7 Mm
B=12.7 Mm
A=90 Degree
Trend 3/41 1/4inch Shank 8mm Dia Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dimensions:
D=5/
Trend 3/6 1/2tc 10mm Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tct Plunge Centre
Trend 3/81 1/2tc 12.7 Mm Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tct Plunge Centre Tip.
Trend 3/81 1/4tc 12.7 Mm Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tct Plunge Ce
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tct Plunge Centre Tip.
Ideal For Cutting Kitchen Workto
Trend 3/83m 1/2tc 12.7mm Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Short Shank For Makita 3600b
Trend 4/08 1/4tc 25.4mm Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tct Plunge Centre Tip.
Trend 4/26 1/2tc 15.9mm Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tct Plunge Centre Tip.
Trend 4/26 1/4tc 15.9mm Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tct Plunge Centre Tip.
Trend 8mm Two Flute Cutter 3/4 X 1/4 Tc
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
D
Trend 8mm X 25mm Two Flute Cutter
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood And Chipboard.
C
Trend Br01x1/2tc 12.7mm X 50mm X 1/2inch Shank Tct Economy Worktop Cutter
Features:
Supplied In Storage Tube For Safe Keeping
Excellent Value
Trend Supplied
Trend C001ax1/4 Tc Two Flute 3.0mm Dia X 9.5mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C001bx1/4 Tc Two Flute 3.2mm Dia X 12.7mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C001cx14 Tc Two Flute Straight 2mm Dia X 5mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plyw
Trend C001x14 Tc Two Flute 3.2mm Dia X 9.5mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood An
Trend C002x14 Tc Two Flute 4.0mm Dia X 11.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf,
Trend C003x1/4 Tc Two Flute 4.8mm Dia X 11.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf
Trend C004x1/4 Tc Two Flute 5mm Dia X 16mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood And
Trend C005x14 Tc Two Flute 6mm Dia X 16mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood And C
Trend C006ax1/4 Tc Two Flute 6.3mm Dia X 16mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood A
Trend C006x1/4 Tc Two Flute 6.3mm Dia X 12.7mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C007x14 Tc Two Flute 6.3mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood A
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood And Chipboard.
Cutter Has A Bottom Cut Feature.
Di
Trend C008x1/4 Tc Two Flute 6.3mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf
Trend C009x1/4 Tc Two Flute 7.1mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C010x1/4 Tc Two Flute 7.1mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C011x1/4 Tc Two Flute 7.9mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C012x1/4 Tc Two Flute 7.9mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C012x14 Tc Two Flute Straight 9mm Dia X 19mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plyw
Trend C013x1/4 Tc Two Flute 9.5mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C014x1/4 Tc Two Flute 9.5mm Dia X 24.5mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf
Trend C015x1/4 Tc Two Flute 9.5mm Dia X 31.8mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C016ax1/2 Tc Two Flute 10mm Dia X 35mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood An
Trend C016x1/2 Tc Two Flute 10mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf,
Trend Craft Pro 1/4in Shank Straight Router Cutter - 10mm Diameter Two Flute Carbide Tips
Two Flute Carbide Tct Tips For Cleaner Cutting Edges And Fast Clearance Of Waste In All Timber And Timber Bas
Trend C017x1/4 Tc Two Flute 11.1mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C018x1/4 Tc Two Flute 11.1mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C019ax1/4 Tc Two Flute 12mm Dia X 19mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf,
Trend C019x1/4 Tc Two Flute 12mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood A
Trend C020x1/4 Tc Two Flute 12.7mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C021ax1/4 Tc Two Flute 12.55mm Dia X25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, M
Trend C021x1/2 Tc Two Flute 12.7mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C021x1/4 Tc Two Flute 12.7mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C022ax1/2 Tc Two Flute 12.7mm Dia X 38mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf
Trend C022x1/2 Tc Two Flute 12.7mm Dia X 32mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf,
Trend C022x1/4 Tc Two Flute 12.7mm Dia X 31.8mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C023ax1/4 Tc Two Flute 14mm Dia X 19mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf,
Trend C023x1/4 Tc Two Flute 14.3mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C024ax1/4 Tc Two Flute 15.0mm Dia X 25mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf
Trend C024x1/4 Tc Two Flute 14.3mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C025ax1/4 Tc Two Flute 16mm Dia X 19mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood An
Trend C025x1/4 Tc Two Flute 15.9mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C026 1/2tc 15.9mm Cutter
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood And Chipbo
Trend C026x1/4 Tc Two Flute 15.9mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C027x1/4 Tc Two Flute 17.5mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C028ax1/4 Tc Two Flute 18.0mm Dia X 25mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C028x1/4 Tc Two Flute 17.5mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C029x1/4 Tc Two Flute 19.1mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C030bx1/2tc Two Flute 19.1mm Dia X 50mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood A
Trend C030x1/2 Tc Two Flute 19.1mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C030x1/4 Tc Two Flute 19.1mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C031x1/4 Tc Two Flute 20.6mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C032x1/4 Tc Two Flute 22.2mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C033ax1/4 Tc Two Flute 25mm Dia X 19mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood An
Trend C033x1/2 Tc Two Flute 25.4mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C033x1/4 Tc Two Flute 25.4mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C034ax1/4 Tc Single Flute 2.0mm Dia X 5mm Cut
Single Fluted Tungsten Carbide Straight Cutter For Fast Free Cutting.
Single Flutes Should Be Chosen Where Speed And Clearance Rates A
Trend C034x1/4 Tc One Flute 3.2mm Dia X 11.1mm Cut
Single Fluted Tungsten Carbide Straight Cutter For Fast Free Cutting.
Single Flutes Should Be Chosen Where Speed And Clearance Rates Ar
Trend C035x1/4 Tc One Flute 4mm Dia X 11.1mm Cut
Single Fluted Tungsten Carbide Straight Cutter For Fast Free Cutting.
Single Flutes Should Be Chosen Where Speed And Clearance Rates Are
Trend C036x1/4 Tc One Flute 4.8mm Dia X 11.1mm Cut
Single Fluted Tungsten Carbide Straight Cutter For Fast Free Cutting.
Single Flutes Should Be Chosen Where Speed And Clearance Rates Ar
Trend C037x1/4 Tc One Flute 6.3mm Dia X 12.7mm Cut
Single Fluted Tungsten Carbide Straight Cutter For Fast Free Cutting.
Single Flutes Should Be Chosen Where Speed And Clearance Rates Are More Imp
Trend C038x1/4 Tc One Flute 6.3mm Dia X 19.1mm Cut
Single Fluted Tungsten Carbide Straight Cutter For Fast Free Cutting.
Single Flutes Should Be Chosen Where Speed And Clearance Rates Ar
Trend C124x14 Tc Straight 12.7mm Dia X 12.7mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf,
Trend C125x14 Tc Two Flute Straight 15.9mm Dia X 12.7mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardw
Trend Craft Pro 1/2in Shank Worktop Joint Cutter - 12.7mm Diameter Two Flute Carbide Tips.
12.7mm Diameter X 50mm Cutting Depth; The Essential Cutter For Routing Post Formed Joints With Worktop Jigs I
Trend C153x1/2tc D/e 12.7mm Dia X 50mm Cut 89mm Ol
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C164x12 Tc Two Flute 12.7mm Dia X 63mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood An
Trend C171x12 Tc Two Flute 12mm Dia X 32mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood And
Trend C171x14 Tc Two Flute 12mm Dia X 32mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood And
Trend C172x12 Tc Two Flute 12mm Dia X 63mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood And
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood And Chipboard.
Cutter Has A Bottom Cut Feature.
Di
Trend C200x12 Tc Two Flute 12mm Dia X 50mm Cut (no Centre Tip)
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, M
Trend Tr37x12tc Straight 12mm Dia X 63mm X 115mm Ol
Gives A Clean Finish To Abrasive Materials Such As Chipboard, Mdf, Plywood And Certain Hardwoods.
For Housing, Grooving And Mortising.
Features
Trend Two Flute 12mm Dia X 63mm 100mm Ol
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood And
D&M Tools are passionate about tools. As one of the largest and longest established independent tool retailers in the UK we supply professional power tools, hand tools, machinery and accessories .
We stock a huge range of power tools including cordless drills, cordless saws, cordless combi drills, cordless screwdrivers as well as routers and angle grinders.
Our machinery range includes, lathes, bandsaws, table saws, spindle moulders, planers and thicknessers and pillar drills as well as dust extractors, welders and water pumps.
D&M Tools also offer a huge range of hand tools and accessories from Irwin,Stanley,Bahcoand many more including hammers, screwdrivers, hand saws, clamps, spanners, chisels and wrenches.
We also stock an extensive selection of clothing and workwear including trousers, jackets, sweatshirts, hoodies, T-shirts, socks and footwear from top brand Snickers, Apache and DeWalt
Great brands, Great deals and Great range backed up with our famous D&M service, why shop anywhere else?
In Stock
Available 2/5 Days
Waiting for Stock
