Over 10,000 items in our stock ready for same day dispatch! FREE delivery for most orders over £99* 'Click & Collect' available from our Twickenham Superstore (*Excludes heavy or oversize items)
Platinum Jubilee Holiday Opening Times - Click HERE
Trend Flip Over Screwdriver Set 4pc
A Four Piece Drill Countersinking And Screwdriving Flip Over Set. Supplied With Quick-change Shank For Fitting Into Snappy Quick Chuck.
Drill Length Can
This Set Incorporates Two Drill Countersinks And Matching Plug Cutters.
Plugs Cutters Are Made From Tool Steel And Are Very Slightly Tapered.
Use On Timber To Drill A Countersunk Hole For A Screw Wh
Trend Snap/asa/2 Snappy Angle Screwdriver Attach Mk2
90 Degree Angled Screwdriver Attachment Allows Access To Tight Corners.
Quick Change Chuck Ensure Tool Is Held Securely.
Use With Bit Holders,
Trend Snap/th1/set Snappy Tool Holder 30 Pc Bit Set
Tool Holders
Heavy Duty Fabric Tool Holder With A Selection Of Assorted Snappy Tools.
With Elastic Pockets To Hold Snappy Shanks
Trend Snap/th2/set Snappy Tool Holder 60 Pc Bit Set
Tool Holders
Heavy Duty Fabric Tool Holder Available With Assorted Snappy Tools.
With Elastic Pockets To Hold Snappy S
Trend Snap/cs/set Snappy 5 Piece Countersink Set
Heat Treated Tool Steel Countersinks With A Hss Drill.
Adjustable For Different Length Screws And Can Produce A 9.5mm (3/8 Inch) Diameter
Trend Snap/dbg/set Snappy Drill Bit Guide 4pc Set
Set Comprising A Quick Chuck And Three Sizes Of Drill Bit Guides For The Accurate Fitting Of Hinges. Drill Bit Guides For No.6, No.8 And No.10 Scre
Trend Pocket Hole Jig Snappy Drill Bit 9.5mm
A 9.5mm (3/8 Inch) Diameter Stepped High Speed Steel Drill For Use With Pocket Hole Jigs.
Supplied With Depth Setting Collar.
Can Be Fitted To The Qui
Trend Recess Countersink Hex - 2.5mm Drill No6 Screw
Heat Treated Tool Steel Countersink With A Hss Drill.
Adjustable For Different Length Screws And Can Produce A Counterbored Hole For Woodplugs.
Trend Recess Countersink Hex - 2.75mm Drill No8 Screw
Heat Treated Tool Steel Countersink With A Hss Drill.
Adjustable For Different Length Screws And Can Produce A Counterbored Hole For Woodplugs
Trend Recess Countersink Hex - 2mm Drill No4 Screw
Heat Treated Tool Steel Countersink With A Hss Drill.
Adjustable For Different Length Screws And Can Produce A Counterbored Hole For Woodplugs.
Trend Snap/bh/m Snappy Micro Bit Holder 66x10.8mm
Magnetic Holder For 1/4-inch Hex 25mm Insert Bits.
Micro Diameter Body.
Small 10.8mm Diameter To Allow Access Into Tighter Spaces.
Pull Back Rin
Magnetic Holder For 1/4-inch Hex 25mm Insert Bits.
Micro Diameter Body.
Small 10.8mm Diameter To Allow Access Into Tighter Spaces.
Pull Back Ring To Release Bits, Spring-loaded Release Of Bit.
Tested
Trend Snap/bh/ot Snappy One Touch Bit Holder 66 X 10mm
Magnetic Holder For 25mm Insert Bits.
One Touch Quick And Easy Release Of Insert Bit.
Small 10.3mm Diameter To Allow Access Into Ti
Trend Snap/bh/ot/a Snappy One Touch Bit Holder 150 X 10mm
Magnetic Holder For 25mm Insert Bits.
One Touch Quick And Easy Release Of Insert Bit.
Small 10.3mm Diameter To Allow Access Into
Trend Snap/cb/1tc Snappy Tc C'bore 4mm X 9.5mm
Counterbore With A Slow Spiral Drill Fitted.
Tungsten Carbide Tipped For Use In Abrasive Materials.
Dimensions:
D=
Trend Snap/cb/2tc Snappy Tc C'bore 4.75mm X 9.5mm
Counterbore With A Slow Spiral Drill Fitted.
Tungsten Carbide Tipped For Use In Abrasive Materials.
Dimensions:
D= 3/8
Trend Snappy 4.75mm X 12.7mm Tct Counterbore - To Recess Screws For Plugging
12/7mm Diameter Tct Counterbore To Drill Precision Recess To Hide Screws Below The Surface When Used With Matching Plug Cut
Trend Snap/cb/4tc Snappy Tc C'bore 6.35mm X 12.7mm
Counterbore With A Slow Spiral Drill Fitted.
Tungsten Carbide Tipped For Use In Abrasive Materials.
Dimensions:
D=1/2 Inch
Trend Snap/cb/5tc Snappy Tc C'bore 6.35mm X 16mm
Counterbore With A Slow Spiral Drill Fitted.
Tungsten Carbide Tipped For Use In Abrasive Materials.
Dimensions
Trend Snap/col/pk1 Snappy Drill Depth Collar Pack 6/8
Dimensions:
Drill Depth Setting Collar For 6mm, 8mm And 10mm Drill Bits.
Depth Collar Fits To Relief Of Drill Bit And Is Adjustable I
Trend Snap/cs/10tc Snappy Tc 3.25mm Drill No.10 Screws
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill.
This Tool Can Be Used In Abras
Trend Snap/cs/12tc Snappy Tc 3.5mm Drill No.12 Screw
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill.
This Tool Can Be Used In Abrasiv
Trend Snap/cs/3mmtc Snappy Countersink 3mm X 9.5mm Tct
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill.
This Tool Can Be Use
Trend Snap/cs/4mmtc Snappy Countersink 4mm X 9.5mm Tct
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill.
This Tool Can Be Use
Trend Snap/cs/4tc Snappy Tc 2mm Drill No.4 Screw
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill.
This Tool Can Be Used In Abrasive Material
Trend Snap/cs/6mmtc Snappy Countersink 6mm X 12.7mm Tct
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill.
This Tool Can Be Used In Abrasive M
Trend Snap/cs/6tc Snappy Tc 2.5mm Drill No.6 Screw
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill.
This Tool Can Be Used In Abrasive
Trend Snap/cs/8tc Snappy Tc 2.75mm Drill No.8 Screw
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill.
This Tool Can Be Used In Abrasive
Trend Snap/csds/10tc Snappy Tc No 10 D/csk Cw Depth Stop
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Short Series Hss Drill And Non Marring Depth S
Trend Snap/csds/12tc Snappy Tc No 12 D/csk Cw Depth Stop
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Short Series Hss Drill And Non Marring Depth S
Trend Snap/csds/8tc Snappy Tc No 8 D/csk Cw Depth Stop
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Short Series Hss Drill And Non Marring Dep
Trend Snappy Countersink - 82 Degree Included Angle
Made From Tool Steel With An 82degree Pitch, The Countersink Is An Affordable, Quality Solution For All Your General Countersinking Needs.
Direct Fi
Trend Snap/d/2 Snappy (1/16) Hss Drill And Adapter
Drill Bits
The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck.
Trend Snap/d/3 Snappy (3/32) Hss Drill And Adapter
Drill Bits
The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft. The Hex Shanks Snap Into The Quick Chuck.
Trend Snap/db/pk1 Snappy Cs Drill Bit Ten Pack
Spare Drills To Suit Trend Snappy Drill Countersinks.
Ten Pack Comprising 2 Pieces Of Each Size.
Diameters 2.0m
Trend Snap/db18/10 Snappy 1/8 Drill Bit Ten Pack
Pack Of 10 Spare Drills To Suit The Drill Countersinks.
Supplied In A Storage Tube.
Dimensions:
D=1/8 Inch
Trend Snap/db332/10 Snappy 3/32 Drill Bit Ten Pack
Pack Of 10 Spare Drills To Suit The Drill Countersinks.
Supplied In A Storage Tube.
Dimensions:
D=3/32 Inch
D=
Trend Snap/db564/10 Snappy 5/64 Drill Bit Ten Pack
Pack Of 10 Spare Drills To Suit The Drill Countersinks.
Supplied In A Storage Tube.
Dimensions:
D=5/64 Inch
D=
Trend Snap/db764/10 Snappy 7/64 Drill Bit Ten Pack
Pack Of 10 Spare Drills To Suit The Drill Countersinks.
Supplied In A Storage Tube.
Dimensions:
D=7/64 Inch
D=
Trend Snap/db964/10 Snappy 9/64 Drill Bit Ten Pack
Pack Of 10 Spare Drills To Suit The Drill Countersinks.
Supplied In A Storage Tube.
Dimensions:
D=9/64 Inch
D=
Trend Snap/dbg/9 Centering Guide 3.5mm Drill
Self-centring Drill For The Accurate Drilling Of Pilot Holes For Fittings Such As Hinges To Ensure Exact Alignment .
It Can Be Easily Dismantled For Cl
Set Comprising Three Sizes Of Drill Bit Guides For The Accurate Fitting Of Hinges And No.2 Pozi And Phillips 50mm Screwdriver Bits.
Drill Bit Guides For No.6, No.8 And No.10 Screws.
Self-cen
Dual Groove Shank Fitting.
For Standard Quick Chucks And Also Festool Centrotec Compatible Shank Fitting.
Quick Release Bit Holder For 25mm Insert Bits And Quick Change Power Groove Bits.
Quick And E
Dual Groove Shank Fitting.
For Standard Quick Chucks And Also Festool Centrotec Compatible Shank Fitting.
Quick Release Bit Holder For 25mm Insert Bits And Quick Change Power Groove Bits.
Quick And E
Trend Snap/f/dbg7 Snappy Centrotec Compatible Dbg 2.7
Festool Centrotec Compatible Shank Fitting.
Self-centring Drill For The Accurate Drilling Of Pilot Holes For Fittings Such As Hinges To En
Festool Centrotec Compatible Shank Fitting.
Self-centring Drill For The Accurate Drilling Of Pilot Holes For Fittings Such As Hinges To Ensure Exact Alignment.
Can Be Easily Dismantled For Cleaning
Trend Snap/fb/10 Snappy Flat Bit 10mm
Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip
Trend Snap/fb/12 Snappy Flat Bit 12mm
Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip
Trend Snap/fb/16 Snappy Flat Bit 16mm
Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip
Trend Snap/fb/19 Snappy Flat Bit 19mm
Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip
Trend Snap/fb/22 Snappy Flat Bit 22mm
Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip
Trend Snap/fb/25 Snappy Flat Bit 25mm
Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip
Trend Snap/fb/8 Snappy Flat Bit 8mm
Flat Bits
An Economical Bit For Cutting Quick Holes In Timber. They Have An 152mm Overall Length With Centre Point, Back Tapered Cutting Edge And Ground Chip Br
Trend Snap/fmd/1 Snappy Flexible Magnetic Driver
Flexible Shaft Bit Holder For Insert And Direct Drive Screwdriver Bits.
Allows Access Into Awkward Positions.
Magnetic To Hold
Trend Snap/fs/10 Snappy Forstner 10mm
High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.
For Use With The Trend Snappy Quick Chuck.
Clean, Preci
Trend Snap/fs/12 Snappy Forstner 12mm
High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.
For Use With The Trend Snappy Quick Chuck.
Clean, Preci
Trend Snap/fs/15 Snappy Forstner 15mm
High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.
For Use With The Trend Snappy Quick Chuck.
Clean, Preci
Trend Snap/fs/18 Snappy Forstner 18mm
High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.
For Use With The Trend Snappy Quick Chuck.
Clean, Preci
Trend Snap/fs/25 Snappy Forstner 25mm
High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.
For Use With The Trend Snappy Quick Chuck.
Clean, Preci
Trend Snap/hd/set Set Of Seven 1/4inch Hex Wood Drills.
Consists Of:
1.5,2, 2.5, 3, 4, 5, 6mm Suitable For Use On Timber Only, With A 1/4" Hex Shank Compatable With The Snappy Range.
 
Trend Snappy Keyless Chuck - 6mm Capacity
Keyless Chuck For Use In Quick Chucks And Impact Drivers To Hold Parallel Shank Drills Bits Up To 1/4 Inch Diameter While Still Allowing Fast Swaps To Snappy
Trend Snappy 35mm Drill - With Depth Stop
The Perfect Accessory For Drilling Consistent 35mm Diameter Holes For Circular Hinges In Kitchen And Cabinet Doors.
Adjustable Depth Stop Collar Can Be Set Fr
Trend Snap/ofld Snappy Offline Driver
Use Drill Next To Walls. Drill And Fixes In Tight Spaces. Outer Sleeve Rotates Allowing Secure Positioning. Shaft Swivels To 15 Degree Angle. Accepts
Trend Snap/pc/10t Snappy Tube Plug Cutter 10mm
Made From Tool Steel They Allow For Longer Plugs To Be Drilled.
Plugs Are Parallel Sided.
Recommended For Use With A Pill
Trend Snap/pc/12 Snappy 1/2in Dia Plug Cutter
Made From Tool Steel.
Plugs Are Very Slightly Tapered.
Recommended For Use With A Pillar Drill.
Use On Timber To Make Plugs/pellets To Plu
Trend Snap/pc/38 Snappy 3/8in Dia Plug Cutter
Made From Tool Steel.
Plugs Are Very Slightly Tapered.
Recommended For Use With A Pillar Drill.
Use On Timber To Make Plugs/pellets To Plu
Trend Snap/pz/4 Snappy Pozi No 4 50mm Ol Two Pack
A Pack Of Two Power Drive No. 4 Pozi Screwdriver Bits. Ideal For No. 10 Window Anchors And Frame Fixers.
Dimensions:
Ol=50 Mm
Size
Trend Snap/rta/7 Snappy Rta 7mm Bolt Stepped Drill
Step Drill With Hardened Cutting Edges For Furniture Construction Bolts.
Supplied With Hss Slow Spiral Drill.
Used To Stepped Drill
Trend Snappy 18mm Flat Bit
An Economical Bit For Cutting Quick Holes In Timber.
With Centre Point, Back Tapered Cutting Edge And Ground Chip Breakers.
Dimensions:
D= 18mm
Overall Le
Trend Snappy 2.75mm Drill Bit
Spare Long Series Hss Drill Bit For The Trend Snappy Drill Bit Guides.
Dimensions:
D=7/64 Inch
D=2.75 Mm
Ol=79 Mm
Diameter Imperial: 7/64
Diame
Trend Snappy 2mm Drill Bit
Spare Long Series Hss Drill Bit For The Trend Snappy Drill Bit Guides.
Dimensions:
D=5/64 Inch
D=1.98 Mm
Ol=79 Mm
Diameter Imperial: 5/64
Diameter M
Spare Long Series Hss Drill Bit For The Trend Snappy Drill Bit Guides.
Dimensions:
D=9/64 Inch
D=3.6 Mm
Ol=79 Mm
Diameter Imperial: 9/64
Diameter Metric: 3.6
Overall Length Metric: 79
Trend Snappy 5 Piece Tct Countersink Set
Tungsten Carbide Tipped Version Of The Popular Trend Snappy Drill Countersink With Adjustable Hss Drill.
This Tool Can Be Used In Abrasive
Trend Snappy 7 Piece Imperial Drill Set
Drill Bit Set
These Are Packs Containing 7 Snappy Drill Sizes. They Are Available In Singles
Drill Bits
The Hss Drill Bits Are Gripped By A Spri
Trend Snappy 7pc Metric Drill Set
The Hss Drill Bits Are Gripped By A Spring Steel Collet Into The Hex Shaft.
The Hex Shanks Snap Into The Quick Chuck.
The Hex Collar, Is Supplied In The Sets To
Trend Snappy 8mm Nut Driver
A High Quality Magnetic Nut Driver.
Ideal For Bolts. Suitable For Use With Landscaping Screws And Sleeper Fasteners.
Dimensions:
Ol=65 Mm
Shank Diameter=
Trend Snappy Centring Guide 5/64 Drill
Self-centring Drill For The Accurate Drilling Of Pilot Holes For Fittings Such As Hinges To Ensure Exact Alignment .
It Can Be Easily Dismantled Fo
Trend Snappy Centring Guide 7/64 Drill
Self-centring Drill For The Accurate Drilling Of Pilot Holes For Fittings Such As Hinges To Ensure Exact Alignment .
It Can Be Easily Dismantled Fo
Trend Snappy Countersink Hex 3.25mm Drill No.10 Screw
Heat Treated Tool Steel Countersink With A Hss Drill.
Adjustable For Different Length Screws And Can Produce A Counterbored Hole For Woodplugs
Trend Snappy Countersink Hex 3.5mm Drill No 12 Screw
Heat Treated Tool Steel Countersink With A Hss Drill.
Adjustable For Different Length Screws And Can Produce A Counterbored Hole For
Trend Snappy Drill Bit Guide No12
Self-centring Drill For The Accurate Drilling Of Pilot Holes For Fittings Such As Hinges To Ensure Exact Alignment .
It Can Be Easily Dismantled For Cleaning And
Trend Snappy Ds/12 Depth Stop
Adjustable Depth Stop For Countersinking.
Fits Onto Drill Countersink Body.
For Countersinking Use Only.
Dimensions:
To Fit Snap/cs/12 & Snap/cs/10
Trend Snappy Forstner 30mm
High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.
For Use With The Trend Snappy Quick Chuck.
Clean, Precise Holes In Softwood
Trend Snappy Forstner 35mm
High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.
For Use With The Trend Snappy Quick Chuck.
Clean, Precise Holes In
Trend Snappy Machine Bit 35mm Dia Tc
For Drilling Blind Holes For Circular Hinges In Kitchen And Cabinet Doors.
Recommended For Use In A Drill Stand.
The 35mm Machine Bit Is Designed To
Trend Snappy Standard Quick Chuck
This Is Fitted Into A Standard 3/8 Inch Key Or Keyless Chuck.
Trend Snappy Attachments Or Any Direct Drive 1/4 Inch Hex Bits Can Then 'snap' In
Trend Wp-snap/d/964s Snappy 9/64 Drill Bit Only Csds/12
Replacement Drill For The Snap/csds/12tc.
Dimensions:
D=9/64 Inch
D=3.5 Mm
Ol=52 Mm
Diameter Imperial: 9/64
Diameter Metric
D&M Tools are passionate about tools. As one of the largest and longest established independent tool retailers in the UK we supply professional power tools, hand tools, machinery and accessories .
We stock a huge range of power tools including cordless drills, cordless saws, cordless combi drills, cordless screwdrivers as well as routers and angle grinders.
Our machinery range includes, lathes, bandsaws, table saws, spindle moulders, planers and thicknessers and pillar drills as well as dust extractors, welders and water pumps.
D&M Tools also offer a huge range of hand tools and accessories from Irwin,Stanley,Bahcoand many more including hammers, screwdrivers, hand saws, clamps, spanners, chisels and wrenches.
We also stock an extensive selection of clothing and workwear including trousers, jackets, sweatshirts, hoodies, T-shirts, socks and footwear from top brand Snickers, Apache and DeWalt
Great brands, Great deals and Great range backed up with our famous D&M service, why shop anywhere else?