Trend 3/8l X 1/4 Tc Two Flute Cutter
Two Flute Tc Cutter Giving Good Chip Clearance.
Ideal For Shallow Lateral Routing Cuts Such As Recessing Hinges.
Corners Will Require
Trend 10h/1 X 1/4 Tc Chamfer Cutter
Ideal For Fast Chamfering.
Popular In The Sign Making Trades.
For Chamfering Edges Of Plastic Material .
Dimensions:
C=10 Mm
C2=1
Trend 11/3 X 1/4 Tc V Groove Cutter
Use For Bevelling, Chamfering And For Producing Mortar Grooves.
Approximately 1.0mm Flat Will Be Found On The Nose.
Is Ideal For Imitating 'v&#
Trend 11/5 X 1/4 Tc V Groove Cutter
Use For Bevelling, Chamfering And For Producing Mortar Grooves.
Approximately 1.0mm Flat Will Be Found On The Nose.
Dimensions:
D=1/2
Trend 11/50 X 1/4 Tc Panel Mould
Ideal For Edge Of Drawer Fronts And Cabinet Doors.
Dimensions:
D=13 Mm
D2=1.2 Mm
C=12 Mm
R=4 Mm
Ol=40.6 Mm
Shank Diameter=1/4 Inch
Sha
Trend 12/3 X 1/4 Tc Radius Cutter
For Coves And Part Of A Rule Joint.
Dimensions:
D=6 Mm
C=15 Mm
R=3 Mm
Ol=51 Mm
Shank Diameter=1/4 Inch
Shank Diameter: 1/4
Di
Trend 12/5 X 1/4 Tc Radius Cutter
For Coves And Part Of A Rule Joint.
Dimensions:
D=10 Mm
C=18 Mm
R=5 Mm
Ol=46 Mm
Shank Diameter=1/4 Inch
Shank Diameter: 1/4
D
Trend 12/6 X 1/4 Tc Radius Cutter
For Coves And Part Of A Rule Joint.
Dimensions:
D=1/2 Inch
D=12.7 Mm
C=19 Mm
Ol=48 Mm
R=1/4 Inch
R=6.3 Mm
Ol=47 Mm
Shank Diameter=
Trend 12/7 X 1/4 Tc Radius Cutter
For Coves And Part Of A Rule Joint.
Dimensions:
D=14 Mm
C=18 Mm
R=7 Mm
Ol=46 Mm
Shank Diameter=1/4 Inch
Shank Diameter: 1/4
D
Trend 13/2 X 1/4 Tc Radius Cutter
For Coves And Part Of A Rule Joint.
Dimensions:
D=18 Mm
C=19 Mm
R=9 Mm
Ol=48 Mm
Shank Diameter=1/4 Inch
Shank Diameter: 1/4
D
Trend 13/3 X 1/4 Tc Radius Cutter
For Coves And Part Of A Rule Joint.
Dimensions:
D=20 Mm
C=18 Mm
R=10 Mm
Ol=46 Mm
Shank Diameter=1/4 Inch
Shank Diameter: 1/4
Trend 18/53 X 1/4 Tc Classic Style Cutter
Ideal For Following Templates When Panelling And Profiling In Furniture Manufacture.
It Is Advisable That The Template Is At Least 5mm Thi
Trend 18/55 X 1/4 Tc Classic Panel Cutter
Shank Mounted Bearing Follows Template Mounted On Board Surface.
It Is Advisable That The Template Is At Least 5mm Thicker Than The Cutter
Trend 2/01 X 1/4 Tc One Flute Cutter 1.5mm
Eccentric Single Flute Cutters.
Cutters Are Chosen For Fast Free Cutting, When Cutting Speed Takes Preference Over Finish.
Cutters With
Trend 2/10 X 1/4 Tc One Flute Cutter 2.0mm
Eccentric Single Flute Cutters.
Cutters Are Chosen For Fast Free Cutting, When Cutting Speed Takes Preference Over Finish.
Cutters With
Trend 2/15 X 1/4 Tc One Flute Cutter 3.0mm
Eccentric Single Flute Cutters.
Cutters Are Chosen For Fast Free Cutting, When Cutting Speed Takes Preference Over Finish.
Cutters With Prefix S A
Trend 3/0 X 1/4 Tc Two Flute Cutter 4.7mm
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges
Trend 3/01 X 1/4 Tc Two Flute Cutter 4.0mm
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Trend 3/02 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dime
Trend 3/08 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 3/10 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dime
Trend 3/12 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dime
Trend 3/2 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Trend 3/20 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dime
Trend 3/20l X 1/4 Tc Two Flute Pocket Cutter
A Two Flute Cutters With Extra Long Shanks.
Deep Grooving, Rebating And Mortising.
Useful For Template Work When Thickness Of Template
Trend 3/22 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dime
Trend 3/3 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Trend 3/5 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Trend 3/50 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 3/51 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 3/6 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 3/7 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 3/8 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 3/80 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 3/9 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 31/02 X 1/4 Tc Dovetail Cutter
For Dovetail Joints And Sliding Dovetails.
To Suit User Preference, The Table Shows Angles From The Horizontal And The Profiles Show Angles Fro
Trend 342 X 1/4 Tc Biscuit Jointer
For Biscuit Jointing Of Timber, Man-made Fibre And Particle Board With The Router.
The Set Includes Three Sizes Of Bearing Which Set The Correct
Trend 36/10 X 1/4 Tc Rebater
Recessing Cutter For Producing Double Rebates.
For Producing Recesses With A Lower Rebate.
Designed To Accept Library/bookcase Strip.
Dimensions:
Trend 4/0 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 4/1 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 4/2 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 4/29 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/4 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 4/5 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has
Trend 4/60 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 4/70 X 1/4 Tc Two Flute Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tc
Trend 46/11 X 1/4 Tc Rover Ovolo Cutter
Self-guiding Cutters For Rounding Over Edges Do Not Require A Side Fence.
They Are Supplied With Two Bearings.
Use The Larger Bearing
Trend 46/115 X 1/4 Tc B/guided Ovolo Cutter
Self-guiding Cutters For Rounding Over Edges Do Not Require A Side Fence.
They Are Supplied With Two Bearings.
Use The Larger Bearing For A Round
Trend 46/130 X 1/4 Tc Rover Ovolo Cutter
Self-guiding Cutters For Rounding Over Edges Do Not Require A Side Fence.
They Are Supplied With Two Bearings.
Use The Larger Bearing For
Trend 46/140 X 1/4 Tc Rover Ovolo Cutter
Self-guiding Cutters For Rounding Over Edges Do Not Require A Side Fence.
They Are Supplied With Two Bearings.
Use The Larger Bearing For
Trend 46/150 X 1/4 Tc Rover Ovolo Cutter
Self-guiding Cutters For Rounding Over Edges Do Not Require A Side Fence.
They Are Supplied With Two Bearings.
Use The Larger Bearing For
Trend 46/2 X 1/4 Tc Edge Trim 90dg
For Trimming Plastic Or Plywood Overlay.
For Copy Profiling, Use The Bearing To Follow A Template Or Base Edge Of Board.
An Approximate 3mm Overlap
Trend 46/20 X 1/4 Tc Edge Trim 90dg
Self-guiding Trimmers With Bearings Mounted On End Of Cutter.
For Trimming Plastic Or Plywood Overlay.
For Copy Profiling, Use The Bearing To F
Trend 46/360 X 1/4 Tc Chamfer Cutter
Ideal For Newel Posts And Caps For Stairs.
Supplied With One Bearing.
Dimensions:
D=35.1 Mm
C=12 Mm
C2=16 Mm
B=12.7 Mm
A=45 Degrees
Ol
Trend 46/37 X 1/4 Tc Chamfer Cutter
Ideal For Newel Posts And Caps For Stairs.
Supplied With One Bearing.
Dimensions:
D=31.8 Mm
C=12 Mm
C2=16 Mm
B=9.5 Mm
A=45 Degrees
Ol=5
Trend 46/80 X 1/4 Tc 3 Flute Trimmer
Self-guiding Triple Flute Cutter.
Extra Fine Trimming And Longer Life.
For Trimming Of Laminate Or Plywood Overlay Etc.
Dimensions:
D=1/
Trend 46/90 X 1/4 Tc Template Profiler
Profiler With Shank Mounted Bearing Guides.
For Use With Router Mounted Above Or Below A Table When Following A Template.
For Profiling And
Trend 62/80 X 1/4 Tc Drill/csink/cbore
For Abrasive Materials. Tools Will Drill, Countersink And Finally Counterbore A Parallel Hole. Designed To Receive Plug Produced By Maker Ref.
Trend 7/01 X 1/4 Tc Ovolo Cutter
Some Ovolo Cutters Can Be Used With Radius Cutters, To Make Rule Joints.
Ref. 7/01 Has An Extra Long Shank Of 40mm.
Dimensions:
D=3/8 Inc
Trend 7/2 X 1/4 Tc Ovolo Cutter
Some Ovolo Cutters Can Be Used With Radius Cutters, To Make Rule Joints.
Dimensions:
D=22 Mm
D2=12 Mm
C=12 Mm
R=5 Mm
Ol=55 Mm
Shank
Trend 7/5 X 1/4 Tc Ovolo Cutter
Some Ovolo Cutters Can Be Used With Radius Cutters, To Make Rule Joints.
Dimensions:
D=31 Mm
C=16 Mm
R=10 Mm
Ol=44.6 Mm
Shank Diamete
Trend 7e/2 X 1/4 Tc Rounding Over Cutter
Small Solid Guide Pin Can Follow More Intricate Shapes In Contrast To Bearing Guided Cutters.
Dimensions:
D=22 Mm
C=12.6 Mm
R=1/4 Inch
R=
Trend 7e/4 X 1/4 Tc Rounding Over Cutter
Small Solid Guide Pin Can Follow More Intricate Shapes In Contrast To Bearing Guided Cutters.
Dimensions:
D=29.0 Mm
C=15.8 Mm
P=
Trend 7e/5 X 1/4 Tc Rounding Over Cutter
Small Solid Guide Pin Can Follow More Intricate Shapes In Contrast To Bearing Guided Cutters.
Dimensions:
D=34.4 Mm
C=19 Mm
P=9 Mm
R=1/2
Trend 9/70 X 1/4 Tc Corner Bead Cutter
Creates A Corner Bead With A Step.
By Making A Second Pass At 90 Degrees A Full Corner Bead Can Be Cut.
Tct Featuring Dnamic Carbide With Ex
Trend 9/71 X 1/4 Tc Corner Bead Cutter
Creates A Corner Bead With A Step.
By Making A Second Pass At 90 Degrees A Full Corner Bead Can Be Cut.
Tct Featuring Dnamic Carbide With Ex
Trend 9/72 X 1/4 Tc Corner Bead Cutter
Creates A Corner Bead With A Step.
By Making A Second Pass At 90 Degrees A Full Corner Bead Can Be Cut.
Tct Featuring Dnamic Carbide With Ex
Trend 9/73 X 1/4 Tc Corner Bead Cutter
Creates A Corner Bead With A Step.
By Making A Second Pass At 90 Degrees A Full Corner Bead Can Be Cut.
Tct Featuring Dnamic Carbide With Extended Lif
Trend T46/0 X 1/4 Tc Guide Trim
For Trimming And Bevelling Timber, Lippings And Plastic Laminate Edges Or Any Shaping Applications.
Self-guiding Trimmer With Bearings Mounted On En
Trend T46/1 X 1/4 Tc Tipcut 90dg
For Trimming And Bevelling Timber, Lippings And Plastic Laminate Edges Or Any Shaping Applications.
Self-guiding Trimmer With Bearings Mounted On E
Trend 3/11 1/4 Tc 3.4mm Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dimensions:
D=3
Trend 3/41 1/4inch Shank 8mm Dia Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Dimensions:
D=5/
Trend 3/81 1/4tc 12.7 Mm Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tct Plunge Ce
Trend 33/60 1/4 Arbor
Standard Duty Arbor With 1/4 Inch Spindle And Spacers.
Enables Mounting Of 1/4 Inch Bore Slotters With And Without Bearings In A Variety Of Positions.
Use Shims/spacers To P
Trend 4/08 1/4tc 25.4mm Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tct Plunge Centre Tip.
Trend 4/26 1/4tc 15.9mm Cutter
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
Has A Tct Plunge Centre Tip.
Trend 421/35 1/42tc Machine Bit
These Machine Bits Are Typically Used By Kitchen Furniture Manufacturers For Recessing Circular Hinges. This Type Without Scribers Are For Laminate Covered Boards.
Trend 46/3 1/4tc Bevel Trim
Cut A Wider Edge Line, At An Angle Of 80 Degrees.
A 16mm Bearing Is Supplied As Standard.
A Larger 19mm Bearing Will Spread The Wear Of The Cutting Edges.
Dimensi
Trend 46/85 1/4tc Flush V
Two Flute.
For Trimming Of Laminate And Solid Lipping.
1.6mm Deep 'v' Groove To Hide Glue Line.
Dimensions:
D=16 Mm
D2=12.7 Mm
C=1 Inch
C=25.4
Trend 8mm Two Flute Cutter 3/4 X 1/4 Tc
Tct For Abrasive Materials Such As Chipboard, Mdf, Plywood, Hardwoods And Hard Plastics.
Two Flutes Give A Clean Finish To Cut Edges.
D
Trend C001ax1/4 Tc Two Flute 3.0mm Dia X 9.5mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C001bx1/4 Tc Two Flute 3.2mm Dia X 12.7mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C001x14 Tc Two Flute 3.2mm Dia X 9.5mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood An
Trend C002x14 Tc Two Flute 4.0mm Dia X 11.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf,
Trend C003x1/4 Tc Two Flute 4.8mm Dia X 11.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf
Trend C004x1/4 Tc Two Flute 5mm Dia X 16mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood And
Trend C005x14 Tc Two Flute 6mm Dia X 16mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood And C
Trend C006ax1/4 Tc Two Flute 6.3mm Dia X 16mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood A
Trend C006x1/4 Tc Two Flute 6.3mm Dia X 12.7mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C007x14 Tc Two Flute 6.3mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood A
Trend C008x1/4 Tc Two Flute 6.3mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf
Trend C009x1/4 Tc Two Flute 7.1mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C010x1/4 Tc Two Flute 7.1mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C011x1/4 Tc Two Flute 7.9mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C012x1/4 Tc Two Flute 7.9mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C013x1/4 Tc Two Flute 9.5mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C014x1/4 Tc Two Flute 9.5mm Dia X 24.5mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf
Trend C015x1/4 Tc Two Flute 9.5mm Dia X 31.8mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C016x1/4 Tc Two Flute 10mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf,
Trend C017x1/4 Tc Two Flute 11.1mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C018x1/4 Tc Two Flute 11.1mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C019ax1/4 Tc Two Flute 12mm Dia X 19mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf,
Trend C019x1/4 Tc Two Flute 12mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood A
Trend C020x1/4 Tc Two Flute 12.7mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C021ax1/4 Tc Two Flute 12.55mm Dia X25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, M
Trend C021x1/4 Tc Two Flute 12.7mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C022x1/4 Tc Two Flute 12.7mm Dia X 31.8mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C023ax1/4 Tc Two Flute 14mm Dia X 19mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf,
Trend C023x1/4 Tc Two Flute 14.3mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C024ax1/4 Tc Two Flute 15.0mm Dia X 25mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf
Trend C024x1/4 Tc Two Flute 14.3mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C025ax1/4 Tc Two Flute 16mm Dia X 19mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood An
Trend C025x1/4 Tc Two Flute 15.9mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C026x1/4 Tc Two Flute 15.9mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C027x1/4 Tc Two Flute 17.5mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C028ax1/4 Tc Two Flute 18.0mm Dia X 25mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C028x1/4 Tc Two Flute 17.5mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C029x1/4 Tc Two Flute 19.1mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C030x1/4 Tc Two Flute 19.1mm Dia X 25.4mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C031x1/4 Tc Two Flute 20.6mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood
Trend C032x1/4 Tc Two Flute 22.2mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C033ax1/4 Tc Two Flute 25mm Dia X 19mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood An
Trend C033x1/4 Tc Two Flute 25.4mm Dia X 19.1mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Md
Trend C034ax1/4 Tc Single Flute 2.0mm Dia X 5mm Cut
Single Fluted Tungsten Carbide Straight Cutter For Fast Free Cutting.
Single Flutes Should Be Chosen Where Speed And Clearance Rates A
Trend C034x1/4 Tc One Flute 3.2mm Dia X 11.1mm Cut
Single Fluted Tungsten Carbide Straight Cutter For Fast Free Cutting.
Single Flutes Should Be Chosen Where Speed And Clearance Rates Ar
Trend C035x1/4 Tc One Flute 4mm Dia X 11.1mm Cut
Single Fluted Tungsten Carbide Straight Cutter For Fast Free Cutting.
Single Flutes Should Be Chosen Where Speed And Clearance Rates Are
Trend C036x1/4 Tc One Flute 4.8mm Dia X 11.1mm Cut
Single Fluted Tungsten Carbide Straight Cutter For Fast Free Cutting.
Single Flutes Should Be Chosen Where Speed And Clearance Rates Ar
Trend C037x1/4 Tc One Flute 6.3mm Dia X 12.7mm Cut
Single Fluted Tungsten Carbide Straight Cutter For Fast Free Cutting.
Single Flutes Should Be Chosen Where Speed And Clearance Rates Are More Imp
Trend C038x1/4 Tc One Flute 6.3mm Dia X 19.1mm Cut
Single Fluted Tungsten Carbide Straight Cutter For Fast Free Cutting.
Single Flutes Should Be Chosen Where Speed And Clearance Rates Ar
Trend C040x1/4 Tc Self G/rebate 35mm Dia X 12.7mm Cut
These Cutters Are Self-guiding And Can Be Used To Produce Rebates, Lap Joints, Tongues And Rebated Corners.
When Using Bearing Ref. B95a Make
Trend C041ax1/4 Tc Dovetail A=104° x 12.7mm Dia Ex-l
These Dovetail Cutters Produce A Tight Reliable Joint For Drawers, Boxes Etc.
Refs. C154 & C041a Can Be Used With Trend
Trend C041x14 Tc Dovetail A=104° x 12.7mm Dia
These Dovetail Cutters Produce A Tight Reliable Joint For Drawers, Boxes Etc.
To Suit User Preference, The Table Shows Angles From The Horizo
Trend C042x1/4 Tc Dovetail A=99° x 9.5mm Dia
These Dovetail Cutters Produce A Tight Reliable Joint For Drawers, Boxes Etc.
To Suit User Preference, The Table Shows Angles From The Horizon
Trend C043x1/4 Tc Cham V Groov A=60° x 12.7mm Dia
For Veining, Panelling, 'v' Grooving, Bevelling & Chamfering.
Dimensions:
D=1/2 Inch
D=12.7 Mm
C=7/16 Inch
C=13 Mm
C2=
Trend C044x14 Tc Chamfer V Groove A=45° X 12.7mm Dia
For Veining, Panelling, 'v' Grooving, Bevelling & Chamfering.
Dimensions:
D=1/2 Inch
D=12.7 Mm
C=1/2 Inch
C=13 Mm
C2=9 M
Trend C045x14 Tc Cham V Groov A=45° x 25.4mm Dia
For Veining, Panelling, 'v' Grooving, Bevelling & Chamfering.
Dimensions:
D=1 Inch
D=25.4 Mm
C=7/16 Inch
C=20 Mm
C2=11
Trend C046x1/4 Tc Chamfer A= 67°¡ X 22.2mm Dia
Two Flute Cutters For Producing Extra Clean Cut Bevelled Edges.
No Plunge Cut.
Dimensions:
D=7/8 Inch
D=22.2 Mm
C=25/64 I
Trend C048x1/4 Tc 45° Chamfer Cutter
Two Flute Cutters For Producing Extra Clean Cut Bevelled Edges.
No Plunge Cut.
Dimensions:
D=1 3/8 Inch
D=34.9 Mm
C=25/64 Inch
C=1
Trend C049x14 Tc S/guided Cham A=45° X 12.7mm Cut
Self-guiding Chamfer/bevel Cutter.
Bearing Follows The Board Beneath.
Dimensions:
D=32 Mm
C=1/2 Inch
C=12.7 Mm
B=9.5 Mm
A=45
Trend C050x1/4 Tc Radius 1.6mm Rad X 3.2mm Dia
These Are Ideal For Engraving And Decorative Panel Work.
Made With Solid Tungsten Carbide Inserts, With Two Flutes.
Dimensions:
D=1/8 I
Trend C051x1/4 Tc Radius 2.4mm Rad X 4.8mm Dia
These Are Ideal For Engraving And Decorative Panel Work.
Made With Solid Tungsten Carbide Inserts, With Two Flutes.
Dimensions:
D=3/16
Trend C052x1/4 Radius 3.2mm Rad X 6.3mm Dia
These Are Ideal For Engraving And Decorative Panel Work.
Made With Solid Tungsten Carbide Inserts, With Two Flutes.
Dimensions:
D=1/4 Inch
D=6.3 Mm
Trend C053ax1/4 Tc Radius 5.0mm Rad X 18mm Cuta
These Cove Style Cutters With Two Flutes, Give Radiused Grooves For Decorative Panel Finishes And Board Edges.
For Deep Channels, Take A Series Of P
Trend C053x1/4 Tc Radius 4.8mm Rad X 9.5mm Dia
These Cove Style Cutters With Two Flutes, Give Radiused Grooves For Decorative Panel Finishes And Board Edges.
For Deep Channels, Take A Se
Trend C054x1/4 Tc Radius 6.3mm Rad X 12.7mm Dia
These Cove Style Cutters With Two Flutes, Give Radiused Grooves For Decorative Panel Finishes And Board Edges.
For Deep Channels, Take A S
Trend C055x1/4 Tc Radius 7.9mm Rad X 15.9mm Dia
These Cove Style Cutters With Two Flutes, Give Radiused Grooves For Decorative Panel Finishes And Board Edges.
For Deep Channels, Take A S
Trend C056x1/4 Tc Radius 9.5mm Rad X 19.1mm Dia
These Cove Style Cutters With Two Flutes, Give Radiused Grooves For Decorative Panel Finishes And Board Edges.
For Deep Channels, Take A Series Of P
Trend C057x1/4 Tc Radius 11.1mm Rad X 22.2mm Dia
These Cove Style Cutters With Two Flutes, Give Radiused Grooves For Decorative Panel Finishes And Board Edges.
For Deep Channels, Take A
Trend C058x1/4 Tc Radius 12.7mm Rad X 25.4mm Dia
These Cove Style Cutters With Two Flutes, Give Radiused Grooves For Decorative Panel Finishes And Board Edges.
For Deep Channels, Take A
Trend C059x1/4 Tc S/guided Rad 4.8mm Rad
Ideally Suited For Cutting Radiused Edges At Speed, As A Side Fence Can Be Dispensed With.
The Guide Bearing Follows The Vertical Edge Or Template. Alterna
Trend C060x1/4 Tc S/guided Rad 6.3mm Rad
Ideally Suited For Cutting Radiused Edges At Speed, As A Side Fence Can Be Dispensed With.
The Guide Bearing Follows The Vertical Edge Or Template. Alterna
Trend C061x1/4 Tc S/guided Rad 7.9mm Rad
Ideally Suited For Cutting Radiused Edges At Speed, As A Side Fence Can Be Dispensed With.
The Guide Bearing Follows The Vertical Edge Or Template. Alterna
Trend C062x1/4 Tc S/guided Rad 9.5mm Rad
Ideally Suited For Cutting Radiused Edges At Speed, As A Side Fence Can Be Dispensed With.
The Guide Bearing Follows The Vertical Edge Or Template. Alterna
Trend C063x1/4 Tc S/guided Rad 12.7mm Rad
Ideally Suited For Cutting Radiused Edges At Speed, As A Side Fence Can Be Dispensed With.
The Guide Bearing Follows The Vertical Edge Or Templa
Trend C065x1/4 Tc Cavetto 4.8mm Rad
Self Guiding Cavetto Style Cutter, Which Follow The Board Edges For Straight Or Curved Work Radius.
Dimensions:
C=1/2 Inch
C=12.7 Mm
D=31 Mm
B=12.7 Mm
R=
Trend C066x1/4 Tc Cavetto 7.9mm Rad
Self Guiding Cavetto Style Cutter, Which Follow The Board Edges For Straight Or Curved Work Radius.
Dimensions:
C=5/8 Inch
C=15.9 Mm
D=38.6 Mm
B=12.7 Mm
Trend C067x1/4 Tc Staff Bead 2mm Rad X 12.7mm Cut
These Staff Bead Are Ideal For Producing Nosings And Attractive Edges. Edge Cut Only.
Dimensions:
D=13.5 Mm
C=1/2 Inch
C=12.7 Mm
R
These Staff Bead Are Ideal For Producing Nosings And Attractive Edges. Edge Cut Only.
Dimensions:
D=15 Mm
C=1/2 Inch
C=12.7 Mm
R=2.8 Mm
Ol=53 Mm
Shank Diameter=1/4 Inch
Shank Diameter: 1/4
Diamete
Trend C069x1/4 Tc Staff Bead 3.6mm Rad X 19.1mm Cut
These Staff Bead Are Ideal For Producing Nosings And Attractive Edges. Edge Cut Only.
Dimensions:
D=17 Mm
C=3/4 Inch
C=19.1 Mm
R=3.6 Mm
O
Trend C070x1/4 Tc Staff Bead 5.2mm Rad X 19.1mm Cut
These Staff Bead Are Ideal For Producing Nosings And Attractive Edges. Edge Cut Only.
Dimensions:
D=20 Mm
C=3/4 Inch
C=19.1 Mm
Trend C071x1/4 Tc Sash Bar 6.3mm Rad X 19.1mm Cut
Ovolo Cutter Designed For Sash Bars But Useful For Decorative Edging.
Dimensions:
D=3/4 Inch
D=19.1 Mm
C=1/2 Inch
C=12.7 Mm
R=6.3 Mm
Ol=53
Trend C072x1/4 Tc Sash Bar 7.9mm Rad X 22.2mm Cut
Ovolo Cutter Designed For Sash Bars But Useful For Decorative Edging.
Dimensions:
D=7/8 Inch
D=22.2 Mm
C=9/16 Inch
C=14.3 Mm
R=7.
Trend C073x1/4 Tc Sash Bar 9.5mm Rad X 25.4mm Cut
Ovolo Cutter Designed For Sash Bars But Useful For Decorative Edging.
Dimensions:
D=1 Inch
D=25.4 Mm
C=5/8 Inch
C=15.9 Mm
R=9.5 M
Trend C074x1/4 Tc Round/over 3.2mm Rad X 9.5mm Cut
Self-guiding Cutters For Rounding Over Edges Do Not Require A Side Fence.
They Are Supplied With Two Bearings.
Use The Larger Bearing
Trend C075x1/4 Tc Round/over 4.8mm Rad X 12.7mm Cut
Self-guiding Cutters For Rounding Over Edges Do Not Require A Side Fence.
They Are Supplied With Two Bearings.
Use The Larger Bearing
Trend C076x14 Tc Round/over 6.3mm Rad X 12.7mm Cut
Self-guiding Cutters For Rounding Over Edges Do Not Require A Side Fence.
They Are Supplied With Two Bearings.
Use The Larger Bearing
Trend C077x1/4 Tc Round/over 7.9mm Rad X 12.7mm Cut
Self-guiding Cutters For Rounding Over Edges Do Not Require A Side Fence.
They Are Supplied With Two Bearings.
Use The Larger Bearing
Trend C078x1/4 Tc Round/over 9.5mm Rad X 15.9mm Cut
Self-guiding Cutters For Rounding Over Edges Do Not Require A Side Fence.
They Are Supplied With Two Bearings.
Use The Larger Bearing
Trend C079x1/4 Tc Round/over 12.7mm Rad X 19.1mm Cut
Self-guiding Cutters For Rounding Over Edges Do Not Require A Side Fence.
They Are Supplied With Two Bearings.
Use The Larger Bearin
By Raising The Cutter, The Top Quirk Is Removed.
Dimensions:
D=25.4 Mm
C=5/8 Inch
C=15.9 Mm
B=9.5 Mm
R=4 Mm
Ol=65.5 Mm
Shank Diameter=1/4 Inch
Shank Diameter: 1/4
Diameter Metric: 25.4
Cut Length
Trend C087x1/4 Tc Roman Ogee 6.3mm Rad X 22.2mm Cut
By Raising The Cutter, The Top Quirk Is Removed.
Dimensions:
D=35 Mm
C=25/32 Inch
C=20 Mm
B=9.5 Mm
R=6.3 Mm
Ol=69.5 Mm
Shank
Trend C090x1/4 Tc Classic Ogee 4mm Rad X 15.9mm Cut
Versatile Cutter, Using All Or Part Of The Cutter.
Dimensions:
D=28.5 Mm
C=5/8 Inch
C=15.9 Mm
B=9.5 Mm
R=4 Mm
Ol=65.5 Mm
Shan
Trend C091x1/4 Tc Classic Ogee 6.3mm Rad X 22.2mm Cut
Versatile Cutter, Using All Or Part Of The Cutter.
Dimensions:
D=38 Mm
C=24 Mm
B=9.5 Mm
R=6.3 Mm
Ol=72 Mm
Shank Diameter=1/4
Trend C094x1/4 Tc Ovolo 4mm Rad 1 X 4mm Rad2
This Double Ribbed Ovolo Style Is An Alternative To The Rounding Over Cutter. If The Cutter Is Lowered, A Top Quirk Can Be Produced.
Dimens
Trend C095x1/4 Tc Ovolo 5.5mm Rad1 X 5.5mm Rad2
This Double Ribbed Ovolo Style Is An Alternative To The Rounding Over Cutter. If The Cutter Is Lowered, A Top Quirk Can Be Produced.
Dim
Trend C096x1/4 Tc S/guided Ogee Quirk 4mm Rad
By Raising The Cutter, The Top Quirk Is Removed. Alternative Bearing Refs. B95a & B127a.
Dimensions:
D=35 Mm
C=13.5 Mm
B=12.7 Mm
R=4 Mm
Ol=
Trend C098x1/4 Tc S/guided Ogee 5mm Rad
Supplied With Extra 1/2 Inch Bearing For Removing The Lower Quirk.
Dimensions:
D=30.5 Mm
C=1/2 Inch
C=12.7 Mm
B=9.5 Mm
B2=12.7 Mm
R=5 Mm
Trend C099x1/4 Tc S/guided Ogee 6.3mm Rad
Supplied With Extra 1/2 Inch Bearing For Removing The Lower Quirk.
Dimensions:
D=35 Mm
C=11/16 Inch
C=17.5 Mm
B=9.5 Mm
B2=12.7 Mm
R=6.3
Trend C104x1/4 Tc S/guided Broken Ogee Quirk 4mm Rad
Alternative Bearing B127a Removes The Lower Quirk.
Dimensions:
C=1/2 Inch
C=12.7 Mm
B=9.5 Mm
R=4 Mm
R2=4 Mm
Ol=64.5 Mm
Shank
Trend C105x1/4 Tc S/guided Broken Ogee Quirk R6.3mm
Alternative Bearing B127a Removes The Lower Quirk.
Dimensions:
C=11/16 Inch
C=17.5 Mm
B=9.5 Mm
R=6.3 Mm
R2=4.8 Mm
Ol=69 Mm
Sh
Trend C106x1/4 Tc Ovolo 3.2mm Rad X 9.5mm Dia
A Small Beading Cutter For Fine Decorative Panelling, Veining Or Rounding Over.
Dimensions:
D=3/8 Inch
D=9.5 Mm
C=5/16 Inch
C=7.9 Mm
Trend C107x1/4 Tc Ogee Panel 2mm Rad
Small Panelling Cutters, Popular For Decorative Cupboard Doors And Furniture Embellishments.
Dimensions:
D=1/2 Inch
D=12.7 Mm
C=3/8 Inch
C=9.5
Trend C108x1/4 Tc Ogee Panel 3.2mm Rad
Small Panelling Cutters, Popular For Decorative Cupboard Doors And Furniture Embellishments.
Dimensions:
D=3/4 Inch
D=19.1 Mm
C=7/16 Inch
C=1
Trend C109x1/4 Tc Ogee Panel 3.2mm Rad
To Create Profiles On Face Or Edge Of Drawer Fronts And Cabinet Doors.
Dimensions:
D=1/2 Inch
D=12.7 Mm
C=3/8 Inch
C=9.5 Mm
R=3.2 Mm
R2=4 Mm
Ol=49.5
Trend C110x1/4 Tc Ogee Panel 4.8mm Rad1
To Create Profiles On Face Or Edge Of Drawer Fronts And Cabinet Doors.
Dimensions:
D=3/4 Inch
D=19.1 Mm
C=35/64 Inch
C=14 Mm
R=4.5 Mm
R2=4
Trend C111x1/4 Tc Broken Ogee 4mm Rad1
Ideal For Following Template. It Is Advisable That The Template Is At Least 5mm Thicker Than The Cut Length Of The Tool.
Dimensions:
D=22.0 Mm
Trend C112x1/4 Tc Flat Ovolo 12mm Rad X 11mm Cut
A Self Guiding Flat Ovolo To Give A Smooth Corner Finish.
Alternatively, Can Be Used To Produce Glazing Bar Profiles.
Dimensions:
D=3
Trend C115x14 Tc S/guided Trimmer 9.5mm Dia
Used For Trimming Plastic Or Plywood Overlays.
Also For Copy Profiling With A Template.
Dimensions:
D=3/8 Inch
D=9.5 Mm
C=1/2 Inch
C=12
Trend C116x14 Tc S/guided Trimmer 12.7mm Dia
Used For Trimming Plastic Or Plywood Overlays.
Also For Copy Profiling With A Template.
Dimensions:
D=1/2 Inch
D=12.7 Mm
C=1 Inch
C=
Trend C117x1/4 Tc S/guided Trimmer 15.9mm Dia
Used For Trimming Plastic Or Plywood Overlays.
Also For Copy Profiling With A Template.
Dimensions:
D=5/8 Inch
D=15.9 Mm
C=5/8 Inch
C
Trend C119x1/4 Tc S/guided Bevel Trim A=65
This Is Bearing Guided And Gives A Smooth Bevel Finish For Laminates And Other Materials.
Bearing Follows The Board Beneath.
Dimensions:
D=
Trend C120x1/4 Tc Keyhole 9.5mm Dia
For Picture Hanging Flush To The Wall.
Plunge Cutter & Move Forward, Then Retract Out From Entry Hole.
A Template Is Recommended.
For No8 & No10 Screw
Trend C121x14 Tc Template/profile 12.7mm Dia
Shank Mounted Bearing Profilers Are Ideal For Template Guidance.
Use For Rebating And Trimming Edges Only.
Extra Care Must Be Taken To
Trend C122x1/4 Tc Cavetto 7.9mm Rad X 15.9mm Cut
Self Guiding Cavetto Style Cutter, Which Follow The Board Edges For Straight Or Curved Work Radius.
Dimensions:
C=5/8 Inch
C=15.9 Mm
Trend C123x1/4 Tc Template/profile 19.1mm Dia
Shank Mounted Bearing Profilers Are Ideal For Template Guidance.
Use For Rebating And Trimming Edges Only.
Extra Care Must Be Taken To Avoi
Trend C124x14 Tc Straight 12.7mm Dia X 12.7mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf,
Trend C125x14 Tc Two Flute Straight 15.9mm Dia X 12.7mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardw
Trend C126x1/4 Tc Round/over 4.8mm Rad X 12.7mm Cut
For Producing Ovolo And Rounding Over Edge Moulds, Using A Side Fence Or Back Fence.
Dimensions:
D=1/2 Inch
D=12.7 Mm
C=23/64 Inch
C=9 Mm
Trend C127x1/4 Tc Round/over 6.3mm Rad X 15.9mm Cut
For Producing Ovolo And Rounding Over Edge Moulds, Using A Side Fence Or Back Fence.
Dimensions:
D=5/8 Inch
D=15.9 Mm
C=13.5 Mm
Trend C128x1/4 Tc Round/over 9.5mm Rad X 22.2mm Cut
For Producing Ovolo And Rounding Over Edge Moulds, Using A Side Fence Or Back Fence.
Dimensions:
D=7/8 Inch
D=22.2 Mm
C=19/32 Inc
Trend C130x14 Tc Corner Bead 4.8mm Rad X 26mm Dia
Attractive Edge Moulds.
A Full Corner Bead Can Be Produced By Making A Second Pass At 90 Degrees.
Dimensions:
D=1 1/32 Inch
D=26 Mm
Trend C131x1/4 Tc Broken Ogee 2.4mm Rad X 10mm Cut
Ideal For Following Template. It Is Advisable That The Template Is At Least 5mm Thicker Than The Cut Length Of The Tool.
Dimensions:
Trend C133x14 Tc Cove 10mm Rad & 20mm Dia
This 'roughing' Trimmer, Leaves An Overhang Of 3mm, For Secondary Final Trim.
Dimensions:
D=1/2 Inch
D=12.7 Mm
C=1 Inch
C=25.4
Trend C135x1/4 Tc Pierce/trim 6.3mm Dia X 18mm Cut
Cuts Out Apertures In Laminate Worktops.
The Nose Of The Cutter Acts As A Guide Follower.
Dimensions:
D=1/4 Inch
D=6.3 Mm
C
Trend C138x1/4 Tc Self G/chamfer 60° Deg X 12.7mm Cut
Ideal For Posts And Newel Caps For Stairs.
Dimensions:
D1=25.4 Mm
C=1/2 Inches
C=12.7 Mm
B=9.5 Mm
A=60 Degrees
Ol=64 Mm
Trend C139x14 Tc Self G/chamfer 30° Deg X 7.0mm Cut
Ideal For Posts And Newel Caps For Stairs.
Dimensions:
D1=35.1 Mm
C=9/32 Inches
C=7 Mm
B=9.5 Mm
A=30 Degrees
Shank Diamete
Trend C140x1/4 Tc Corner Bead 3.2mm Rad
Attractive Edge Moulds.
A Full Corner Bead Can Be Produced By Making A Second Pass At 90 Degrees.
Dimensions:
D=7/8 Inch
D=22.3
Trend C141x1/4 Tc Panel/veining 4.8mm Rad
For Decorative Panel And Veining Work.
Ideal For Carving With The Routerlathe.
Dimensions:
D=3/8 Inch
D=9.5 Mm
C=7.5 Mm
R=4.8 Mm
Ol=47.5 Mm
Shank
Trend C142x1/4 Tc Ogee Mould 7.5mm Rad X 27mm Dia
For Panel And Veining Work. Ideal For Barley Twists Using The Routerlathe.
Dimensions:
D=1 1/16 Inch
D=27 Mm
C=5/8 Inch
C=16 Mm
R=7.5
Trend C143ax8mm Tc Slotting 3mm Cut
These Two Wing Tungsten Carbide Tipped Slotting Cutters Are Ideal For Grooving And Rebating Operations. A 12.7mm Diameter Bearing Is Supplied With Ever
Trend C143x1/4 Tc Slotting 3.2mm Cut
These Two Wing Tungsten Carbide Tipped Slotting Cutters Are Ideal For Grooving And Rebating Operations. A 12.7mm Diameter Bearing Is Supplied With Eve
Trend C144ax8mm Tc Slotting 4mm Cut
These Two Wing Tungsten Carbide Tipped Slotting Cutters Are Ideal For Grooving And Rebating Operations. A 12.7mm Diameter Bearing Is Supplied With Every Cutter G
Trend C144x1/4 Tc Slotting 4.7mm Cut
These Two Wing Tungsten Carbide Tipped Slotting Cutters Are Ideal For Grooving And Rebating Operations. A 12.7mm Diameter Bearing Is Supplied With Eve
Trend C145ax 8mm Tc Slotting 6mm Cut
These Two Wing Tungsten Carbide Tipped Slotting Cutters Are Ideal For Grooving And Rebating Operations. A 12.7mm Diameter Bearing Is Supplied With Eve
Trend C145x14 Tc Slotting 6.3mm Cut
These Two Wing Tungsten Carbide Tipped Slotting Cutters Are Ideal For Grooving And Rebating Operations. A 12.7mm Diameter Bearing Is Supplied With Ever
Trend C146x1/4 Tc Slotting 8mm Cut
These Two Wing Tungsten Carbide Tipped Slotting Cutters Are Ideal For Grooving And Rebating Operations. A 12.7mm Diameter Bearing Is Supplied With Every
Trend C147x1/4 Tc Slotting 9.5mm Cut
These Two Wing Tungsten Carbide Tipped Slotting Cutters Are Ideal For Grooving And Rebating Operations. A 12.7mm Diameter Bearing Is Supplied With Eve
Trend C148x1/4 Tc Slotting 10mm Cut
These Two Wing Tungsten Carbide Tipped Slotting Cutters Are Ideal For Grooving And Rebating Operations. A 12.7mm Diameter Bearing Is Supplied With Ever
Trend C149x14 Tc Profile Scriber Ogee Set
The Classic Method Of Producing Cabinet Panelled Door And Drawer Fronts Is Made Easy With These Profile Scriber Sets. With The Combination Type, Components
Trend C151x1/4 Tc Vertical Panel Moulder 22mm Rad1 X 18mm Rad2
For Use In A Router Table Only.
Take 3 - 4 Passes, Increasing The Depth With Each Pass. Suitable For Straight Panels Only.
Dimen
Trend C152x14 Tc Biscuit Jointer Set 37.2mm Dia
This Two Wing Self-guiding Tungsten Carbide Tipped Slotting Cutter Is Ideal For Biscuit Jointing.
The Set Is Supplied With Three Ball Bearing Guides
Trend C154x1/4 Tc Dovetail 6.0mm Dia X 98° Two Flute
These Dovetail Cutters Produce A Tight Reliable Joint For Drawers, Boxes Etc.
Refs. C154 & C041a Can Be Used With Trend Cdj300, Cdj600
Trend C155x8mm Tc Prof Counter Profile Ogee Set R4mm
The Classic Method Of Producing Cabinet Panelled Door And Drawer Fronts Is Made Easy With These Profile Scriber Sets. With The Combination Type,
Trend C157x1/4 Tc Profile Scriber Raised Bevel
The Classic Method Of Producing Cabinet Panelled Door And Drawer Fronts Is Made Easy With These Profile Scriber Sets. With The Combination Type, Compo
Trend C158x1/4 Tc Tongue & Groover Set 41mm Dia
A One Piece Set. Parts Are Inter-changed On The Arbor To Alter The Set-up. For Use With Router Table Only.
Dimensions:
D=41 Mm
C=6
Trend C159x1/4 Tc Dovetail 12.7mm Dia X 104° Deg Spurs
To Suit User Preference, The Table Shows Angles From The Horizontal And The Profiles Show Angles From The Vertical.
Dimensions:
D=14.3
Trend C160ax14 Tc Dovetail 15.9mm Dia X 104° Deg
To Suit User Preference, The Table Shows Angles From The Horizontal And The Profiles Show Angles From The Vertical.
Dimensions:
D=
Trend C160x1/4 Tc Dovetail 15.9mm Dia X 104° Deg Spurs
To Suit User Preference, The Table Shows Angles From The Horizontal And The Profiles Show Angles From The Vertical.
Dimensions:
D=17.7
Trend C161ax14 Tc Dovetail 18mm Dia X 104° Deg
To Suit User Preference, The Table Shows Angles From The Horizontal And The Profiles Show Angles From The Vertical.
Dimensions:
D=45/64 Inch
Trend C161x1/4 Tc Dovetail 18mm Dia X 104° Deg Spurs
To Suit User Preference, The Table Shows Angles From The Horizontal And The Profiles Show Angles From The Vertical.
Dimensions:
D=19.7 M
Trend C162ax14 Tc Dovetail 15.1mm Dia X 104° Deg Guided
These Cutters Are For Use With The Nutool And Axminster Power Tool Centre Dovetail Jigs.
Dimensions:
D=15 Mm
C=13.5 Mm
Ol=63
Trend C162x1/4 Tc Dovetail 12.7mm Dia X 104° Deg Guided
These Cutters Are For Use With The Nutool And Axminster Power Tool Centre Dovetail Jigs.
Dimensions:
D=12.7 Mm
C=12.7 Mm
Ol=6
Trend C163x1/4 Tc Dovetail 15.1mm Dia X 104° Deg Spurs
To Suit User Preference, The Table Shows Angles From The Horizontal And The Profiles Show Angles From The Vertical.
Dimensions:
D=15.1
Trend C167x 1/4tc Guided Trimmer 6.35mm Dia X 12.7mm
Used For Trimming Plastic Or Plywood Overlays.
Also For Copy Profiling With A Template.
Dimensions:
D=1/4 Inch
D=6.35 Mm
C=1/2 Inch
C=12
Trend C168x1/4 Tc Guided Trimmer 6.35mm Dia X 25.4mm
Used For Trimming Plastic Or Plywood Overlays.
Also For Copy Profiling With A Template.
Dimensions:
D=1/4 Inch
D=6.35 Mm
C=1 Inch
C=25.4
Trend C171x14 Tc Two Flute 12mm Dia X 32mm Cut
Suitable For A Wide Range Of Applications Such As Engraving, Grooving, Rebating And Shallow Mortising.
Use On Softwoods, Hardwoods, Mdf, Plywood And
Trend Routabout Cutter 1/4inch For Use With 18mm Material
Replacement Cutter For Use On 18mm Floor Thickness.
Dimensions:
Shank Diameter=1/4 Inch
For Use On 18 Mm Floor Thickness
D=18 Mm
D=8
Trend Routabout Cutter 1/4inch For Use With 22mm Material
Replacement Cutter For Use On 22mm Floor Thickness.
Dimensions:
Shank Diameter=1/4 Inch
For Use On 22 Mm Floor Thickness
D=18 Mm
D=8
Trend Routabout Hole Cutter For 18mm Material 1/4 Inch Cutter
Access To Pipes & Cables Beneath Chipboard Floors In Seconds.
For Builders, Plumbers & Electricians.
A 250mm Diamete
Trend Routabout Hole Cutter For 22mm Material 1/4 Inch Cutter
Access To Pipes & Cables Beneath Chipboard Floors In Seconds.
For Builders, Plumbers & Electricians.
A 250mm Diamete
Trend T420/35x8mm Tc Hinge Sinking 35mm Dia X8mm Shank
These Machine Bits Are Typically Used By Kitchen Furniture Manufacturers For Recessing Circular Hinges. This Economy Range Is Supplied Without
D&M Tools are passionate about tools. As one of the largest and longest established independent tool retailers in the UK we supply professional power tools, hand tools, machinery and accessories .
We stock a huge range of power tools including cordless drills, cordless saws, cordless combi drills, cordless screwdrivers as well as routers and angle grinders.
Our machinery range includes, lathes, bandsaws, table saws, spindle moulders, planers and thicknessers and pillar drills as well as dust extractors, welders and water pumps.
D&M Tools also offer a huge range of hand tools and accessories from Irwin,Stanley,Bahcoand many more including hammers, screwdrivers, hand saws, clamps, spanners, chisels and wrenches.
We also stock an extensive selection of clothing and workwear including trousers, jackets, sweatshirts, hoodies, T-shirts, socks and footwear from top brand Snickers, Dickies, Apache and DeWalt
Great brands, Great deals and Great range backed up with our famous D&M service, why shop anywhere else?
In Stock
Available 2/5 Days
Waiting for Stock
